Information Technology - Open Systems Interconnection - Protocol for Providing the Connection-Mode Transport Service
Introduction: This Recommendation 1 International Standard is one of a set of Recommendations 1 International Standards produced to facilitate the interconnection of information processing systems. This set of Recommendations 1 International Standards covers the services and protocols required to achieve such interconnection. The Transport Protocol is positioned with respect to other related Recommendations 1 International Standards by the layers defined in the Reference Model for Open Systems Interconnection (see CCITT Rec. X.200 1 IS0 7498). It is most closely related to, and lies within the field of application of the Transport Service (see ITU-T Rec. X.214 I ISO/IEC 8072). It also uses and makes reference to the Network Service Standard (see CCITT Rec. X.213 I ISO/IEC 8348), whose provisions it assumes in order to accomplish the transport protocol’s aims. The interrelationship of these Recommendations I International Standards is illustrated in Figure Intro. 1. Transport Protocol Specification Transport service definition ----Reference to aims---------f ----Reference to assumptions-----~ Network service definition TO71 9300 Figure Intro. l- Relationship between the Transport Protocol and adjacent services This Recommendation I International Standard specifies a common encoding protocol procedures to be used with different network qualities of service. It is intended that the Transport Protocol should be simple but Serv ice qualities possible, without restricting future extensions. and
Scope: This Recommendation 1 International Standard specifies: a> five classes of procedures when operating over the connection-mode network service: 1) 2) class 0: simple class; class 1: basic error recovery class; 3) class 2: multiplexing class; 4) class 3: error recovery and multiplexing class; 5) class 4: error detection and recovery class; for the connection-mode transfer of data and control information from one transport entity to a peer transport entity; b) one class (class 4) of procedure when operating over the connectionless-mode network service; the means of negotiating the class of procedures to be used by the transport entities; d) the structure and encoding of the transport protocol data units used for the transfer of data and control information. The procedures are defined in terms of: the interactions between peer transport entities through the exchange of transport protocol data units; ii) the interactions between a transport entity and the transport service user in the same system through the exchange of transport service primitives; iii) the interactions between a transport entity and the network service provider through the exchange of network service primitives. These procedures tables in Annex A are defined in the main text of this Recommendation 1 International Standard supplemented by state These procedures are applicable to instances of communication between systems which support the Transport Layer of the OS1 Reference Model and which wish to interconnect in an open systems environment. This Recommendation 1 International Standard specifies, in clause 14, conformance requirements for systems implementing these procedures and provides the PICS proforma in compliance with the relevant requirements, and in accordance with the relevant guidance, given in CCITT Rec. X.291 and ISO/IEC 9646-2. It does not contain tests which can be used to demonstrate this conformance. References The following Recommendations and International Standards contain provisions which, through references in this text, constitute provisions of this Recommendation 1 International Standard. At the time of publication, the editions indicated were valid. All Recommendations and
Contents: