ISO/IEC DIS 14443-3.2-2026 PDF

ISO/IEC DIS 14443-3.2-2026 PDF

Cards and security devices for personal identification-Contactless proximity objects-Part 3: Initialization and anticollision

$48.00 $96.00 -50%
Product Code: ISO/IEC DIS 14443-3.2
Stock In Stock
Edition: .2
Published: 05/18/2026
Number of Pages: 61
File Size: 1 file, 2.7 MB

Available Options

Product Description

Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anticollision

Introduction: The ISO/IEC 14443 series describes the parameters for identification cards or objects for international interchange. This document describes polling for proximity cards entering the field of a proximity coupling device, the byte format and framing, the initial Request and Answer to request command content, methods to detect and communicate with one proximity card among several proximity cards (anticollision) and other parameters needed to initialize communications between a proximity card and a proximity coupling device. Protocols and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443-4. Part of the timing of data communication is defined in ISO/IEC 14443-2. Test methods for this document are defined in ISO/IEC 10373-6. The ISO/IEC 14443 series is intended to allow operation of proximity cards in the presence of other contactless cards or objects conforming to the ISO/IEC 10536 [1] series and the ISO/IEC 15693 [2] series and near field communication (NFC) devices conforming to ISO/IEC 18092 and ISO/IEC 21481 [3]. © ISO/IEC 2026 – All rights reserved

Scope: This document describes the following: — polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); — the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs; — the initial Request and Answer to request command content; — methods to detect and communicate with one PICC among several PICCs (anticollision); — other parameters required to initialize communications between a PICC and PCD; — optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria; — optional capability to allow a device to alternate between the functions of a PICC and a PCD to communicate with a PCD or a PICC, respectively. A device which implements this capability is called a PXD. This document is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443-2), to PCDs (as described in ISO/IEC 14443-2) and to PXDs.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC DIS 14443-3.2-2026 PDF

ISO/IEC DIS 14443-3.2-2026 PDF

$48.00 $96.00