Identification cards — Integrated circuit cards — Part 3: Electrical interface and transmission protocols
Introduction: ISO/IEC 7816 is a series of standards specifying integrated circuit cards and the use of such cards for interchange. These cards are identification cards intended for information exchange negotiated between the outside world and the integrated circuit in the card. As a result of an information exchange, the card delivers information (computation result, stored data), and/or modifies its content (data storage, event memorization). The following parts are specific to cards with galvanic contacts and three of them specify electrical interfaces. — ISO/IEC 7816-2 specifies dimensions and location of the contacts. — ISO/IEC 7816-3 specifies electrical interface and transmission protocols for asynchronous cards. NOTE The first and second editions of ISO/IEC 7816-3 specified an optional use of contact C6 to provide the card with programming power required to write or to erase internal non-volatile memory. As every card manufactured since 1990 internally generates programming power, the third edition deprecates this use, as well as the related indications in the Answer-to-Reset and the related controls in each transmission protocol. — ISO/IEC 7816-10 specifies electrical interface and answer to reset for synchronous cards. — ISO/IEC 7816-12 specifies electrical interface and operating procedures for USB cards. All the other parts are independent of the physical interface technology. They apply to cards accessed by one or more of the following methods: contacts, close coupling and radi
Scope: This part of ISO/IEC 7816 specifies the power and signal structures, and information exchange between an integrated circuit card and an interface device such as a terminal. It also covers signal rates, voltage levels, current values, parity convention, operating procedure, transmission mechanisms and communication with the card. It does not cover information and instruction content, such as identification of issuers and users, services and limits, security features, journaling and instruction definitions.