ISO/IEC GUIDE 98-6-2021 PDF

ISO/IEC GUIDE 98-6-2021 PDF

Uncertainty of measurement-Part 6: Developing and using measurement models

$162.00 $324.00 -50%
Product Code: ISO/IEC GUIDE 98-6
Stock In Stock
Edition: 1ST
Published: 02/2021
Number of Pages: 108
File Size: 1 file, 2 Bytes

Available Options

Product Description

Uncertainty of measurement — Part 6: Developing and using measurement models

Introduction: A measurement model constitutes a relationship between the output quantities or mea- surands (the quantities intended to be measured) and the input quantities known to be involved in the measurement. There are several reasons for modelling a measurement. Models assist in developing a quantitative understanding of the measurement and in im- proving the measurement. A model enables values of the output quantities to be obtained given the values of the input quantities. Additionally, a model not only allows propaga- tion of uncertainty from the input quantities to the output quantities; it also provides an understanding of the principal contributions to uncertainty. This document is accordingly concerned with the development of a measurement model and the practical use of the model. One of the purposes of measurement is to assist in making decisions. The reliability of these decisions and the related risks depend on the values obtained for the output quantities and the associated uncertainties. In turn, these decisions depend on a suitable measurement model and the quality of information about the input quantities. Although the development of a measurement model crucially depends on the nature of the measurement, some generic guidance on aspects of modelling is possible. A measurement model might be a straightforward mathematical relationship, such as the ideal gas law, or, at the other extreme, involve a sophisticated numerical algorithm for its evaluation, such as the detectio

Scope: This document provides guidance on developing and using a measurement model and also covers the assessment of the adequacy of a measurement model. The document is of particular interest to developers of measurement procedures, working instructions and documentary standards. The model describes the relationship between the output quantity (the measurand) and the input quantities known to be involved in the measurement. The model is used to obtain a value for the measurand and an associated uncertainty. Measure- ment models are also used in, for example, design studies, simulation of processes, and in engineering, research and development. This document explains how to accommodate in a measurement model the quantities in- volved. These quantities relate i) to the phenomenon or phenomena on which the mea- surement is based, that is, the measurement principle, ii) to effects arising in the specific measurement, and iii) to the interaction with the artefact or sample subject to measure- ment. The guidance provided is organised in accordance with a work flow that could be con- templated when developing a measurement model from the beginning. This work flow starts with the specification of the measurand (clause 6). Then the measurement principle is modelled (clause 7) and an appropriate form of the model is chosen (clause 8). The basic model thus obtained is extended by identifying (clause 9) and adding (clause 10) effects arising from the measurement and the artefact or sample subject to measurement. Guidance on assessing the adequacy of the resulting measurement model is given in clause 12. The distinction between the basic model and the (complete) measurement model in the work flow should be helpful to those readers who already have a substantial part of the measurement model in place, but would like to verify that it contains all effects arising from the measurement so that it is fit for purpose. Guidance on the assignment of probability distributions to the quantities appearing in the measurement model is given in JCGM 100:2008 and JCGM 101:2008. In clause 11, this guidance is supplemented by describing how statistical models can be developed and used for this purpose.

Contents:

  • Foreword
  • Introduction
  • Scope
  • 10 Extending the basic model
  • 10.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
  • 10.2 Adding effects to the basic model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
  • 10.3 Modelling well-understood effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
  • 10.4 Modelling poorly understood effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
  • 10.5 Shared effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
  • 10.6 Drift and other time-dependent effects
  • 11 Statistical models used in metrology
  • 11.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
  • 11.2 Observation equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
  • 11.3 Specification of statistical models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
  • 11.4 Models for calibration and analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
  • 11.5 Models for homogeneity studies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
  • 11.6 Models for the adjustment of observations . . . . . . . . . . . . . . . . . . . . . . . . . . 45
  • 11.7 Models for time series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
  • 11.8 Bayesian statistical models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
  • 11.9 Estimation and uncertainty evaluation for statistical models . . . . . . . . . . . . . . . 50
  • 11.10 Model selection and model uncertainty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
  • 12 Assessing the adequacy of the measurement model
  • 13 Using the measurement model
  • 13.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
  • 13.2 Use of a model beyond the range for which it has been validated . . . . . . . . . . . . 61
  • 13.3 Explicit univariate measurement model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
  • 13.4 Explicit multivariate measurement model . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
  • 13.5 Implicit univariate measurement model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
  • 13.6 Implicit multivariate measurement model . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
  • 13.7 Measurement models involving complex-valued quantities . . . . . . . . . . . . . . . . 64

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC GUIDE 98-6-2021 PDF

ISO/IEC GUIDE 98-6-2021 PDF

$162.00 $324.00