ISO/IEC TR 11801-9905-2018 PDF

ISO/IEC TR 11801-9905-2018 PDF

Information technology-Generic cabling for customer premises-Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application

$113.50 $227.00 -50%
Product Code: ISO/IEC TR 11801-9905
Stock In Stock
Edition: 1ST
Published: 02/2018
Number of Pages: 42
File Size: 1 file, 702 Bytes

Available Options

Product Description

Information technology – Generic cabling for customer premises – Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application

Introduction: This document provides guidance to determine whether and which installed channels will support 25GBASE-T. It takes into account the design goals for 25GBASE-T equipment such as: a) the frequency signal range up to 1 250 MHz; b) the support of two-connector channels up to 30 m in length. The requirements of 25GBASE-T are fully defined in ISO/IEC/IEEE 8802-3:2017/AMD3. Installed two-connector channels which are characterized up to 1 250 MHz and support all the requirements of the ISO/IEC/IEEE 8802-3:2017/AMD3 link segment are expected to support the 25GBASE-T application. Characterization of channels using Category 7A components is described in 4.4. Characterization of channels using Category 7 components is described in 4.5. Characterization of channels using Category 6A components is described in 4.6. This document also provides mitigation procedures to improve the performance of installed channels to the point where the 25GBASE-T application is supported. Additionally, this document recommends the use of Class I and Class II channels to support 25GBASE-T in new installations. Class I and Class II channels according to ISO/IEC 11801-1 will support 25GBASE-T without mitigation. Component requirements are not provided in this document and should not be inferred from the channel limits provided.

Scope: This part of ISO/IEC 11801, which is a Technical Report, a) provides guidance on how to select and assess installed channels which conform to ISO/IEC 11801-1, and clarify if they also support ISO/IEC/IEEE 8802-3:2017/AMD3 for 25GBASE-T; b) specifies the methods to assess whether installed channels constructed with Category 7A, 7, or 6A components meet the 25GBASE-T requirements; c) provides guidance to identify which channels are likely to meet the 25GBASE-T requirements to avoid unnecessary testing; d) provides mitigation techniques to improve the performance of installed channels to meet the 25GBASE-T requirements; e) provides cabling recommendations for new installations. NOTE 1 The channel transmission performance specified in this document is derived from the 25GBASE-T requirements in ISO/IEC/IEEE 8802-3:2017/AMD3. NOTE 2 This document does not re-specify component or channel definitions of ISO/IEC 11801-1.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC TR 11801-9905-2018 PDF

ISO/IEC TR 11801-9905-2018 PDF

$113.50 $227.00