ISO TS 15230-2-2023 PDF

ISO TS 15230-2-2023 PDF

Mechanical vibration and shock-Coupling forces at the man-machine interface for hand-transmitted vibration-Part 2: Evaluation of coupling forces

$71.50 $143.00 -50%
Product Code: ISO TS 15230-2
Stock In Stock
Edition: 1.
Published: 01/2023
Number of Pages: 22
File Size: 1 file, 1 Byte

Available Options

Product Description

Mechanical vibration and shock — Coupling forces at the man-machine interface for hand-transmitted vibration — Part 2: Evaluation of coupling forces

Introduction: The coupling forces between the hand-arm system and a hand-held or hand-guided machine during its use are very important factors. Although these forces are of interest for both vibrating and non- vibrating machines, the primary focus of this document is to provide a set of descriptions of the forces at the man‑machine interface that are primarily for the hand-arm system in contact with a vibrating surface of a machine. The coupling forces involved in the operation of a vibrating machine generally consist of two different components. The first component is the force applied by the hand-arm system which is used to provide necessary control and guidance of the machine and to achieve desired productivity. This quasi-static force (frequency below 5 Hz) is the focus of this document. The second component is the biodynamic force which results from the biodynamic response of the hand-arm system to a vibration. Different couplings of the hand to a vibrating surface can affect the human body in two different ways: a) The relationship between the measured handle vibration and the resultant transmission of vibration to the hand-arm system might be altered. This alteration modifies the exposure and possibly also the vibration effect to the hand-arm system, although no epidemiological evidence is available at present. b) The coupling can result in a synergistic effect with vibration exposure which could affect anatomical structures, such as the vascular system, nerves, joints and tendons.

Scope: This document describes a coupling-force-dependent weighting of the r.m.s. value to the frequency- weighted acceleration, ahw. The procedure only applies to normal gripping situations (embracing a handle). If only part surfaces of the hand are exposed to vibration, the procedure is not applicable. The evaluation methods defined in this document are intended to enable research. This document provides guidance on an additional procedure to that defined in ISO 5349-1 for measuring and reporting hand-transmitted vibration exposures by taking into account the coupling force exerted on the vibrating surface. This document is intended to facilitate future research on hand-arm vibration risks and to complement data collected using the ISO 5349-1 methodology. This document does not apply as an alternative to ISO 5349-1. The data derived from this document does not apply to perform tasks in accordance with national regulations, guidelines or recommendations for workplace vibration or machinery vibration emissions. This document does not apply to the legal obligations related to the protection of workers from hand-arm vibration in the workplace and the declaration of vibration emissions from machinery. The methodology defined in this document is based only on biomechanical relationships between vibration transmission to the hand-arm system as a function of total forces. The influence of contact force and pressure on the surface of the hand remains unconsidered and requires further research.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 15230-2-2023 PDF

ISO TS 15230-2-2023 PDF

$71.50 $143.00