ISO TS 15791-2-2022 PDF

ISO TS 15791-2-2022 PDF

Plastics-Development and use of intermediate-scale fire tests for plastics products-Part 2: Use of intermediate-scale tests for semi-finished and finished products

$71.50 $143.00 -50%
Product Code: ISO TS 15791-2
Stock In Stock
Edition: 2.
Published: 11/2022
Number of Pages: 22
File Size: 1 file, 1 Byte

Available Options

Product Description

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Introduction: The major benefit in intermediate-scale testing is the ability to reflect more accurately the fire conditions of real fires than small-scale tests. For example: — Specimen mounting. Specimens can incorporate end-use fixings, joints and air-gaps (see Annex A) in the larger test apparatus. In addition, thick and/or profiled products may be accommodated. This capability is valuable for testing thick multilayer composites (such as sandwich structures). It is also useful for testing profiled product such as pipes, pipe insulations, cable trays, GRP frames and similar products. — Test specimen size and orientation. Intermediate-scale tests allow to evaluate fire growth. The ability to measure flame spread beyond the impingement zone of the ignition source is a desirable feature. — Observation of actual phenomena of products (especially thermoplastics) exposed to ignition sources. Representative behaviour may be observed with intermediate-scale test specimens. The test results may be useful to the manufacturers of the products and regulation authorities[11]. However, intermediate-scale tests may have the following disadvantages because of their large scale. — Intermediate-scale tests may develop an increased amount of fire effluent. — Intermediate-scale tests may require higher cost. — An intermediate-scale test may limit the fire scenario and cannot realize a wide range of fire behaviours. An intermediate-scale test can be used as a screening test for large-scale tests for the purp

Scope: This document provides guidelines and specifies requirements for the development and use of intermediate-scale fire tests applicable to semi-finished and finished products made of, or containing, plastics. This document covers typical applications of such tests, as well as methods of preparation and mounting of test specimens. This document applies to planar, linear or profiled plastics products. These products can be tested in horizontal or vertical orientation. This document defines the parameters to be measured, the way that test results are expected to be reported and explains how they can be used for direct product assessment or as input data for scaling studies.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 15791-2-2022 PDF

ISO TS 15791-2-2022 PDF

$71.50 $143.00