Respiratory protective devices - Classification for respiratory protective device (RPD), excluding RPD for underwater application
Introduction: This Technical Specification contains the classification of Respiratory Protective Devices (RPD) and the related marking in accordance with the requirements of the performance standards. The basic classification, which applies to all RPD, will be marked in the following order: a) protection class; b) work rate class; c) respiratory interface class. Some examples for marking of commonly known RPD are included in Annex B. For Supplied Breathable Gas RPD, the classification also includes gas capacity class. For Filtering RPD, the classification also includes a particle filter class and/or the gas filter types and classes. RPD designated to be used for Special Applications are further classified accordingly. The special applications identified are — Firefighting, — Chemical, Biological, Radiological and Nuclear (CBRN), — Marine, — Mining, — Abrasive blasting, — Welding, and — Escape. Each RPD will have an individual classification based on its performance specified in the relevant performance standards. Explanations of the classification and examples of the classification of RPD are given in the Annexes. The following definitions apply in understanding how to implement an ISO International Standard and other normative ISO deliverables (TS, PAS, IWA): — “shall” indicates a requirement; — “should” indicates a recommendation; — “may” is used to indicate that something is permitted; — “can” is used to indicate that something is possible, for example, that an organization or individua
Scope: This Technical Specification specifies the classification of Respiratory Protective Devices based on their performance. The performance requirements are given in the relevant performance standards.