Petroleum products - Biodiesel - Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
Introduction: This Technical Specification establishes a method for quantitative determination of free glycerol, mono-, di-, triacylglycerols and total glycerol in fatty acid methyl esters (biodiesel) by gas chromatography. High concentrations of these components can contribute to formation of deposits on the pistons and valves of diesel cycle engines. Additionally, they can cause problems during storage and in the engine’s fuel injection system. Alternative methods for similar determinations exist in ASTM D6584[2] and EN 14105,[3] which are tailor made to regional quality specification needs. This Technical Specification describes an alternative technique using more easily available internal standards, instrumentation that can also measure esters and a procedure applicable to short chain fatty acid esters, such as those from palm kernel and coconut oil. This Technical Specification thus provides a wider usage with similar or worse precision as other techniques. © ISO 2016 – All rights reserved
Scope: This Technical Specification establishes a methodology for quantitative determination of free glycerol, mono-, di-, triacylglycerols and total glycerol by gas chromatography in biodiesel produced from any raw material including coconut or palm oil and animal fat. It is not applicable for biodiesel from castor oil. In most actual cases, biodiesel is based on fatty acid methyl esters (FAME). These have also been used during the precision study for this test method. There is no indication that the methodology does not apply to other ester types, but the precision has not been determined nor compared. NOTE For the purposes of this Technical Specification, the term “% (m/m)” is used to represent the mass fraction, µ.