Biomechanical effects on amusement ride passengers
Introduction: Most passenger-carrying devices, e.g. vehicles, transport systems, elevators, cableways, and other similar structures, are deliberately designed to minimize biomechanical effects on passengers. Amusement rides are different in that the biomechanical effects are deliberately introduced in order to amuse people through stimulation of their sensory system. Thus, in addition to mechanical, electrical and other hazards, amusement rides could feature significant biomechanical hazards for passengers. Passengers being moved by amusement rides are subject to inertia forces. The magnitude, direction, duration of exposure to, and rate of change of, these forces could create risks that need to be minimized. The risks may be increased by the use of entertaining effects. Design of the amusement ride in accordance with this Technical Specification, together with ISO 17842, minimizes any risks from these biomechanical effects. When it is important for safety reasons, passenger weight, height, and age also need to be considered. Moreover, amusement ride passengers can have different states of health or well-being during a ride cycle and there is a probability of injury not due to any amusement ride defect but owing to the individual health state of a passenger. When a designer, manufacturer or operator provides a warning before the ride entrance for guests, making them aware of ride use restrictions considering their state of health (see Annex D), this can limit legal liability for possible h
Scope: This Technical Specification has been drawn up with the objective of ensuring the safety of amusement ride passengers, based on the international experience of manufacture and operation of such structures throughout the world gained over decades prior to its publication. It enables the identification of potential hazards and classification of biomechanical effects, including information on recommended acceleration limits, rate of their onset and their duration, to ensure acceptable degrees of biomechanical risks at the stage of amusement ride design, as well as to take such risks into account during development of operational procedures and information on use limitations for amusement ride guests. It gives recommendations regarding use limitations for amusement rides in accordance with the health condition and the well-being of passengers. It also specifies body dimensions of passengers 1,20 m to 2,0 m in height for motion risk analysis on amusement rides. These body dimensions can be taken into account when designing passenger containments and restraints. It does not cover devices used in the circus, theatre or sports, or other devices intended for use only by specially trained people. Nevertheless, it can be used in the design of any similar structural or passenger- carrying device even if it does not explicitly mention the device. This Technical Specification is not applicable to amusement rides put into operation before the date of its publication.
Contents:
- Foreword
- Introduction
- Scope