ISO TS 19124-1-2023 PDF

ISO TS 19124-1-2023 PDF

Geographic information-Calibration and validation of remote sensing data and derived products-Part 1: Fundamentals

$145.50 $291.00 -50%
Product Code: ISO TS 19124-1
Stock In Stock
Edition: 1.
Published: 04/2023
Number of Pages: 62
File Size: 1 file, 4 Bytes

Available Options

Product Description

Geographic information — Calibration and validation of remote sensing data and derived products — Part 1: Fundamentals

Introduction: The ISO 19124 series addresses post-launch calibration and validation (Cal/Val) of remotely sensed data and products derived from the data. This document, ISO 19124-1, provides the fundamentals and a common framework on Cal/Val of remote-sensing data and derived products. Subsequent parts of the ISO 19124 series deal with sensor- or product-specific Cal/Val. NOTE In contrast to the ISO 19124 series, the ISO 19159 series focuses on the pre-launch Cal/Val process of the sensor and hardware. This document was drafted based on material provided by the major organizations that are active in this field such as CEOS (international), NASA (USA), ESA (Europe), JAXA (Japan), CSIRO (Australia), and the Chinese space agency. In accordance with the ISO/IEC Directives, Part 2, 2018, Rules for the structure and drafting of International Standards, in International Standards the decimal sign is a comma on the line. However, the General Conference on Weights and Measures (Conférence Générale des Poids et Mesures) at its meeting in 2003 passed unanimously the following resolution: “The decimal marker shall be either a point on the line or a comma on the line.” In practice, the choice between these alternatives depends on customary use in the language concerned. In the technical areas of geodesy and geographic information it is customary for the decimal point always to be used, for all languages. That practice is used throughout this document.  © ISO 2023 – All rights reserved

Scope: The ISO 19124 series is focused on calibration and validation (Cal/Val) of remote sensing data, which are collected by a sensor on-board a platform in a mission, and products derived in part or whole from the data. The ISO 19124 series defines the metadata related to the calibration and validation process that has not been defined in other ISO/TC 211 International Standards. The metadata allows the data providers to provide a standardized description of the Cal/Val process they have applied to the data. It allows the data users to get the same forms of metadata from different data providers. This document addresses the overall framework and common calibration and validation processes related to Earth observation data and derived products from different types of remote sensors. Subsequent parts in the ISO 19124 series will target data from specific sensors, for example, infrared, ultraviolet/visible/near-infrared, microwave, or broadband, products derived from those data, and calibration and validation sites. Calibration addresses a geometric, radiometric, or spectral correction of the data. Validation addresses an evaluation of the quality and the accuracy of the data and the derived products.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 19124-1-2023 PDF

ISO TS 19124-1-2023 PDF

$145.50 $291.00