ISO TS 19700-2016 PDF

ISO TS 19700-2016 PDF

Controlled equivalence ratio method for the determination of hazardous components of fire effluents - Steadystate tube furnace

$129.00 $258.00 -50%
Product Code: ISO TS 19700
Stock In Stock
Edition: 2ND
Published: 09/15/2016
Number of Pages: 56
File Size: 1 file, 2 Bytes

Available Options

Product Description

Controlled equivalence ratio method for the determination of hazardous components of fire effluents - Steadystate tube furnace

Introduction: Fire safety engineering using performance-based design requires engineering methods for specific performance aspects of fire safety, but applicable to all types of structural systems, products and processes. This includes standard test methods for obtaining data on specific fire-related phenomena including the generation of harmful fire effluents. These have been designed to provide the input data necessary for engineering calculation methods for physical, chemical and biological properties. The exposure conditions and performance need to be adequately quantified to allow extrapolation from test conditions to different fire situations occurring in the real world. The toxic hazard to an occupant of a building or transport enclosure during a fire depends on exposure to the time-varying concentrations of toxic products (gases and smoke particulates) in each occupant’s breathing zone, the effect of each toxicant and the interactions between them. The concentrations of toxic gases and particles depend primarily on the mass-loss rate of the fuel, the yields of each toxicant and the dynamics of air entrainment and effluent dispersal within the occupied enclosure(s). Other factors, such as losses from deposition on the walls of the enclosure, may also need to be considered. For fire safety calculations, such as those described in ISO 16732-1[1], the yields of toxic products from the burning fuel are necessary inputs. Since combustion conditions vary during a fire and between differen

Scope: This document describes a steady-state tube furnace (SSTF) method for the generation of fire effluent for the identification and measurement of its constituent combustion products, in particular, the yields of toxicants under a range of fire decomposition conditions. It uses a moving test specimen and a tube furnace at different temperatures and airflow rates as the fire model. The interlaboratory reproducibility has been assessed with selected homogenous thermoplastic materials and this document is therefore limited in applicability to such materials. The method is validated for testing homogeneous thermoplastic materials that produce yields of a defined consistency. See limitations in Clause 12. This method has been designed as a performance-based engineering method to provide data for input to hazard assessments and fire safety engineering design calculations. The method can be used to model a wide range of combustion conditions by using different combinations of temperature, non-flaming and flaming decomposition conditions and different fuel/oxygen ratios in the tube furnace. These include the combustion conditions for the following types of fires, as detailed in ISO 19706:2011, Table 1: — Stage 1: Non-flaming: — Stage 1b) Oxidative pyrolysis from externally applied radiation; — Stage 2: Well-ventilated flaming (representing a flaming developing fire); — Stage 3: Under-ventilated flaming: — Stage 3a) Small localized fires in closed or poorly ventilated compartments; — Stage 3b) Post-flashover fires. For each flaming fire type, the minimum conditions of test are specified in terms of the equivalence ratio, ϕ, as follows: Stage 2 ϕ ≤ 0,75; Stages 3a) and 3b) ϕ = 2 ± 0,2. Guidance on the choice of additional decomposition conditions is given in Annex A. The data on toxic product concentrations and yields obtained using this document can be used as part of the estimation of toxic potencies, in conjunction with toxic potency calculation methods in ISO 13344, and as an input to the toxic hazard assessment from fires in conjunction with fire growth and effluent dispersal modelling, and fractional effective dose (FED) calculation methods in ISO 13571. Application of

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 19700-2016 PDF

ISO TS 19700-2016 PDF

$129.00 $258.00