ISO TS 19870-2023 PDF

ISO TS 19870-2023 PDF

Hydrogen technologies-Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate

$182.00 $364.00 -50%
Product Code: ISO TS 19870
Stock In Stock
Edition: 1.
Published: 11/2023
Number of Pages: 60
File Size: 1 file, 5 Bytes

Available Options

Product Description

Hydrogen technologies — Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate

Introduction: The Paris Agreement was adopted at the UN Climate Change conference (COP21) with the aims of: strengthening the global response to the threat of climate change, restricting global temperature rise to below 2 °C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1,5 °C above pre-industrial levels. To meet these goals, greenhouse gas (GHG) emissions need to be reduced by about 45 % from 2010 levels by 2030, reaching net zero in 2050 (IPCC, 2018; UNFCCC, 2021). GHG initiatives on mitigation rely on the quantification, monitoring, reporting and verification of GHG emissions and/or removals. International Standards that support the transformation of scientific knowledge into tools can help in reaching the targets of the Paris Agreement to address climate change. ISO 14040 and ISO 14044 define the principles, requirements and guidelines identified in existing International Standards on life cycle assessment (LCA). The ISO 14060 series provides clarity and consistency for quantifying, monitoring, reporting and validating or verifying GHG emissions and removals to support sustainable development through a low-carbon economy. It also benefits organizations, project proponents and stakeholders worldwide by providing clarity and consistency on quantifying, monitoring, reporting and validating or verifying GHG emissions and removals. ISO 14067 is based on the principles, requirements and guidelines on LCA identified in ISO 14040 and ISO 14044 and aims t

Scope: ISO 14044 requires the goal and scope of an LCA to be clearly defined and be consistent with the intended application. Due to the iterative nature of LCA, it is possible that the LCA scope needs to be refined during the study. This document specifies methodologies that can be applied to determine the carbon footprint of a product (CFP) or partial CFP of a hydrogen product in line with ISO 14067. The goals and scopes of the methodologies correspond to either approach a) or b), given below, that ISO 14040:2006, A.2 gives as two possible approaches to LCA. a) An approach that assigns elementary flows and potential environmental impacts to a specific product system, typically as an account of the history of the product. b) An approach that studies the environmental consequences of possible (future) changes between alternative product systems. Approaches a) and b) have become known as attributional and consequential, respectively, with complementary information accessible in the ILCD handbook.[1] There are numerous pathways to produce hydrogen from various primary energy sources. This document describes the requirements and evaluation methods applied to several hydrogen production pathways of interest: electrolysis, steam methane reforming (with carbon capture and storage), co- production and coal gasification (with carbon capture and storage), auto-thermal reforming (with carbon capture and storage), hydrogen as a co-product in industrial applications and hydrogen from biomass waste as feedstock. This document also considers the GHG emissions due to the conditioning or conversion of hydrogen into different physical forms and chemical carriers: hydrogen liquefaction; production, transport and cracking of ammonia as a hydrogen carrier; hydrogenation, transport and dehydrogenation of liquid organic hydrogen carriers (LOHCs). This document considers the GHG emissions due to hydrogen and/or hydrogen carriers’ transport up to the consumption gate. It is possible that future revisions of this document will consider additional hydrogen production, conditioning, conversion and transport methods. This document applies to and includes every delivery along the supply chain up t

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 19870-2023 PDF

ISO TS 19870-2023 PDF

$182.00 $364.00