Nanotechnologies — Clay nanomaterials — Part 2: Specification of characteristics and measurements for clay nanoplates used for gas-barrier film applications
Introduction: The barrier property in polymeric materials has become progressively more important in recent years with the widespread use of plastic films and rigid plastics for food packaging, medical packaging, electronic devices, construction, agriculture and so on. All polymeric materials have varying degrees of gas permeability. Therefore, the required level of gas barrier performance varies depending on the application. Barrier films often consist of multilayers or coated films designed to be impervious to gas and moisture migration, as single-layer films are in general quite permeable to most gases. Food packaging films are required to have oxygen gas barrier properties and water vapour barrier properties. A transparent gas barrier film obtained by applying a silica or alumina vapour deposition method on a PET or nylon film is generally used for food packaging, pharmaceutical packaging, industrial product packaging and so on. Recently, a film with a higher level of gas barrier properties has been required for organic light emitting diode displays. These high gas-barrier properties cannot be achieved by simply using conventional barrier film for food packaging. High gas-barrier films are expected to be used in a wide range of fields, such as electronics, pharmaceutical packaging and hydrogen storage. Various approaches can be taken to improve barrier properties in plastics packaging. There is a method of adding gas-impermeable nano-objects to plastic to make nanocomposites. One of th
Scope: This document specifies characteristics to be measured and measurement methods for clay nanoplate samples in powder and suspension forms used for gas-barrier films. In addition, measurement protocols for the individual characteristics are described. This document does not deal with characteristics of post-manufacturing modification of clay nanoplates. This document does not cover considerations specific to health and safety issues either during manufacturing or use.