ISO TS 21237-2020 PDF

ISO TS 21237-2020 PDF

Nanotechnologies-Air filter media containing polymeric nanofibres-Specification of characteristics and measurement methods

$48.00 $96.00 -50%
Product Code: ISO TS 21237
Stock In Stock
Edition: 1ST
Published: 03/2020
Number of Pages: 18
File Size: 1 file, 2 Bytes

Available Options

Product Description

Nanotechnologies — Air filter media containing polymeric nanofibres — Specification of characteristics and measurement methods

Introduction: Air filter media play an important role in the performance and efficiency of different types of air filters. In this respect, most air filter media take advantage of nonwovens to separate solid or liquid particles. Air filter media have a wide range of applications such as gas turbine inlet air, industrial dust collectors, respiratory masks, personal protective equipment, heating, ventilation and air conditioning systems, cleanrooms, etc. In recent years, air filter media containing nanofibres have been commercialized and widely used by different industries due to their high filtration efficiency along with a low pressure drop created by the slip flow effect[6]. Air filter media containing nanofibres are normally produced by depositing one or more types of polymer-based nanofibres directly on the surface of a suitable porous substrate during spinning. Since the diameter of nanofibres is significantly smaller than that of conventional microfibres employed in filters, it offers a higher chance of inertial impaction and interception, i.e. a more optimum filtration efficiency. The slip flow also results in a reduced pressure drop and more contaminants passing near the surface of the nanofibres. Hence, the inertial impaction and interception efficiencies rise. As a result, the filtration capability of the nanofibres layer increases for the same pressure drop as compared with a conventional fibre layer. Additionally, the very high surface area of nanofibres facilitates the adsorpti

Scope: This document specifies the characteristics to be measured of air filter media containing polymeric nanofibres on the surfaces of a substrate. It also describes measurement methods for determining the individual characteristics. This document does not cover characteristics specific for health and safety issues. NOTE The properties/performances assessment of air filter media related to applications requires the use of relevant published standards. The physical properties and performances of filtration media, such as pressure drop, and the particle removal efficiency of air filter media are measured with test methods suitable for specific applications.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 21237-2020 PDF

ISO TS 21237-2020 PDF

$48.00 $96.00