ISO TS 21596-2021 PDF

ISO TS 21596-2021 PDF

Solid biofuels-Determination of grindability-Hardgrove type method for thermally treated biomass fuels

$48.00 $96.00 -50%
Product Code: ISO TS 21596
Stock In Stock
Edition: 1ST
Published: 10/2021
Number of Pages: 16
File Size: 1 file, 1 Byte

Available Options

Product Description

Solid biofuels — Determination of grindability — Hardgrove type method for thermally treated biomass fuels

Introduction: Grindability characteristics are of fundamental importance during solid biofuel preparation for energy conversion processes, requiring a predictable particle size distribution. Particles that are too large or too wide in their distribution may result in feeding problems as well as un-burnt fuel passing through the conversion process. Also, in case of processing of biomass for pre-treatment, consistency in particle size determines the yield of such pre-treatment as well as the quality of the final solid biofuel. The effectiveness of combustion in a pulverized fuel furnace depends strongly on the reactivity and particle size distribution of the pulverized fuel among other factors. For coal, the Hardgrove Grindability Index (HGI) test was developed to characterize the relative grindability of a particular quality of coal relative to a pre-determined standard quality of coal (ASTM D409). The HGI test is an empirical batch method that simulates the continuous grinding and crushing operation of a ball, table or tube type of industrial coal pulverizer, herein also called coal mill. The HGI value is an indication of the degree of grinding required to reach a particular particle size necessary for effective combustion. Manufacturers of coal pulverizers for preparation of pulverized coal for combustion in coal burning plants provide curves that show the relationships between the HGI for coal, coal mill capacity in terms of tonne/h and coal mill power in kW. This is done as part of the

Scope: This document describes a method for determination of grindability of graded thermally treated and densified biomass fuels such as classified in ISO/TS 17225-8, for the purpose of preparing fuels with a defined particle size distribution for effective combustion in pulverized fuel boilers. The grindability characteristics determined by the test method provide guidance as to the pulverizing mill performance when utilizing such fuels. Apart from pelletized materials as described in ISO/TS 17225-8, the method can also be applied to non- compressed or non-densified thermally treated biomass as specified in ISO 17225-1:2021, Table 14 and Table 15. The results created with this method are not relevant for large wood chips, since limitations apply for large pulverizing coal mills, which are typically not used for grinding materials such as chips.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 21596-2021 PDF

ISO TS 21596-2021 PDF

$48.00 $96.00