ISO TS 21815-2-2021 PDF

ISO TS 21815-2-2021 PDF

Earth-moving machinery-Collision warning and avoidance-Part 2: On-board J1939 communication interface

$162.00 $324.00 -50%
Product Code: ISO TS 21815-2
Stock In Stock
Edition: 1ST
Published: 07/2021
Number of Pages: 90
File Size: 1 file, 8 Bytes

Available Options

Product Description

Earth-moving machinery — Collision warning and avoidance — Part 2: On-board J1939 communication interface

Introduction: The increasing use of detection systems and avoidance technology has been supporting operators to safely operate machines in the field of mining and construction. At the same time, there are demands to set standards for machines and systems detecting, alerting and intervening to mitigate collision risk. There are currently two existing standards in the field: ISO 16001 and ISO 17757. These standards provide guidance for visibility aids and object detection systems and for autonomous and semi- autonomous machines, however, there is currently no standard that describes collision risk awareness, warning signals and collision avoidance actions of the machinery operated by humans where there is a risk of collision. Collision warning and avoidance systems are developing technologies; and the algorithms are not yet mature and well understood. This document is intended to foster innovation and accelerate the pace of improvements in new collision warning and avoidance technologies. The performance requirements of this document are technology neutral and do not specify technologies to meet the requirements. The systems described in this document are intended to assist the operator of the machine. As current technologies are unable to achieve full collision warning/avoidance in every situation, the responsibility for safe operation of the machine remains with the operator of the machine. This document defines a protocol for communication between a machine and a connected device to allow

Scope: This document describes the on-board J1939 communication interface between a connected device and mobile machines for use in earth-moving, mining and road construction applications to enable interventional collision avoidance actions defined in ISO 21815-1 based on the SAE J1939 protocol. This interface is intended for use by a collision avoidance system (CAS) device integrated independently from the original machine providing intervention signals to slow down, stop or prevent motion of the machine. The protocol defined by this document can also be used to provide input information for a collision warning system (CWS). This document is not intended for plug-and-play implementation of CAS or CWS on the machine. Additional details not fully described in this document can be negotiated by the CAS or CWS manufacturer and the machine manufacturer to enable functionality. This document does not preclude the possibility of the machine manufacturer or the CxD manufacturer developing alternative on-board communication interfaces.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 21815-2-2021 PDF

ISO TS 21815-2-2021 PDF

$162.00 $324.00