Nanotechnologies — 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
Introduction: Electron tomography, in transmission electron microscope (TEM), has impact on nanotechnology and nanomaterial metrology like that of computer tomography in medicine. For example, industries using nanotechnologies have requirements to verify materials, processes and products. Quantitative measurement at the nanoscale, including three-dimensional (3D) image reconstruction of nano-objects using TEM, responds to this need. TEM, a two-dimensional (2D) imaging instrument, can provide 2D projection images of materials at the nanoscale, in the length range from below 1 nm to above 100 nm. From multiple 2D TEM images collected at suitable tilt increments, the 3D shape, size and volume parameters can be determined. This document describes sample preparation, instrumentation setup, data acquisition and processing for 3D image reconstruction of nano-objects using TEM, from which dimensional parameter values can be determined and interpreted. Variation in methodology for use with scanning transmission electron microscopy (STEM) is included in an informative annex. The method described herein is limited to samples dispersed on or within an electron-transparent rod-shaped support. This method is particularly useful when the detailed shape of a limited number of objects, such as nanoparticles, is sought. For example, when 2D measurements yield a non-uniform distribution of objects, 3D image reconstruction can be used applied to study a small number of the objects in more detail. A variant of
Scope: This document provides guidance for sample preparation, data acquisition by transmission electron microscopy, data processing, and three-dimensional image reconstruction to measure size and shape parameters of nano-objects on rod-shaped supports. The method is applicable to samples dispersed on or within an electron-transparent rod-shaped support.