Large yachts — A methodologic framework to assess large yachts (30m+) on their environmental performance and credentials
Introduction: This document has been developed in response to growing industry demand for a realistic and transparent methodology to assess and compare large yachts regarding their environmental performance while in operation. Increasingly, yachts are being promoted as “green” or “sustainable” without quantifiable criteria, while simultaneously more clients are looking for references to understand the environmental footprint of yachts. The International Maritime Organization (IMO), with the International Convention for the Prevention of Pollution from Ships (MARPOL) Annex VI Energy Efficiency Design Index (EEDI),[18] has developed an instrument for ships, however yachts are generally not subject to EEDI. Based on voluntary attempts, the EEDI was determined to be inadequate for the specific application to large yachts due to its narrow scope and different operational assumptions. Elaborating on results of a five-years joint industry project, the document draws on collaboration between major shipyards, naval architects, classification, environmental experts and research institutes. It provides a framework with requirements not covered by legislation for yachts over 30 m and below 5 000 Gross Tonnage (GT), and complementary for yachts over 5 000 GT. It can be seen as pro-active self-regulation to set new industry standards, providing a sector specific, goal-driven approach. Specifically, the EEDI methodology presumes continuous vessel movement, whereas yachts typically spend approximately 90
Scope: This document specifies a methodology to calculate the environmental impact of operational energy use for large yachts and enables the comparative assessment of a yacht's environmental performance against a defined baseline fleet. The method established herein is robust and based on the best available data, with transparency and comparability across various yacht types and technical characteristics. This document explicitly addresses operational energy consumption during the yacht's use phase, emphasizing the efficiency of onboard systems benchmarked against the found average operational profile and the environmental emissions coming from this energy, both upstream and downstream. It excludes behavioural variables arising from individual yacht operation patterns. Additionally, the production and maintenance materials and processes (upstream impacts), as well as yacht end-of-life considerations (part of downstream impacts), are outside the scope of this document. The operational profile specified in this document assumes that the yacht is professionally crewed year- round and capable of independent transoceanic voyages. NOTE For motor yachts, this operational assumption generally aligns with IMO MARPOL requirements, which apply to ships exceeding 400 GT that must be surveyed and certified for MARPOL compliance. Sailing yachts typically exhibit lower GT for equivalent length; however, their cruising behaviours align closely with motor yachts of comparable length.