ISO TS 23471-2022 PDF

ISO TS 23471-2022 PDF

Experimental designs for evaluation of uncertainty-Use of factorial designs for determining uncertainty functions

$96.50 $193.00 -50%
Product Code: ISO TS 23471
Stock In Stock
Edition: 1.
Published: 11/2022
Number of Pages: 34
File Size: 1 file, 2 Bytes

Available Options

Product Description

Experimental designs for evaluation of uncertainty — Use of factorial designs for determining uncertainty functions

Introduction: This document has been elaborated in response to the need for standardized single laboratory designs to determine measurement uncertainty (JCGM 100[1]) by means of experiments. It applies in situations where the standard deviation of the observations is not constant but depends on the measurand and where the measurement uncertainty is derived by a top-down approach. This need has been expressed in such areas as consumer protection, food safety, environmental analytics and medical diagnostics. Uncertainty evaluation usually requires the quantification and subsequent combination of uncertainties arising from random variation and uncertainties associated with corrections. Random variation may arise within a particular experiment under the same conditions, or across a range of conditions. The former kind of variation occurs under repeatability conditions, hence usually being characterised as repeatability standard deviation or repeatability coefficient of variation; precision across a range of conditions is generally termed intermediate precision or reproducibility (ISO 5725 (all parts)[3]). The most common experimental design for estimating the laboratory variance and the repeatability variance is the ANOVA design described in ISO 5725-2. In this design, an equal number of observations are collected under repeatability conditions for each participating laboratory. Alternative designs for interlaboratory studies, in which other factors are varied in addition to the laboratory fac

Scope: This document specifies experimental procedures and statistical analysis for the determination of measurement uncertainty in situations where the following conditions are fulfilled: Condition 1: The level of the measurand is non-negative, e.g. concentration level of a contaminant in a sample. Condition 2: Measurement error consists of two independent components: for one of these components the relative standard deviation is constant (that is, the absolute deviation is proportional to the level of the measurand), whereas for the other component the absolute standard deviation is constant (that is, independent of the level of the measurand). Condition 3: Samples for different levels of the measurand can be made available; if the level of the measurand is the concentration of a chemical substance, samples could be obtained e.g. by fortifying (spiking) blank samples. Conditions 1 and 2 are met for most applications of instrumental chemical analyses. Condition 3 can be met for chemical analyses if blank samples are available. This document can also be used to determine precision data for a particular laboratory for different technicians, different environmental conditions, the same or similar test items, with the same level of the measurand, over a certain period of time.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 23471-2022 PDF

ISO TS 23471-2022 PDF

$96.50 $193.00