Fire safety engineering - Selection of design occupant behavioural scenarios
Introduction: In a fire safety engineering assessment, the ability of occupants to escape safely or find a designated place of refuge is evaluated for each design fire scenario, taking account of the occupants expected to be present in the building or other structure. The purpose of this Technical Specification is to outline a general methodology for selecting design fire scenarios for the specific fire safety objective of life safety of the occupants, and then developing the occupant behavioural scenarios for which those design fire scenarios will be tested. ISO 16733-1 provides general guidance on the selection of design fire scenarios. Since each design fire scenario might require several different occupant behavioural scenarios, the number of possible design occupant behavioural scenarios in any built environment (a building, structure or transportation vehicle) can be very large, and it is not possible to quantify them all. This large set of possibilities needs to be reduced to a manageably small set of occupant behavioural scenarios that are amenable to analysis. In a deterministic assessment, which is implicitly envisioned in this Technical Specification, a manageable number of design occupant behavioural scenarios is selected. For a full quantitative risk assessment, see ISO 16732-1. The characterization of an occupant behavioural scenario involves a description of the initial occupant distribution and the number and other characteristics of the population, including their reaction
Scope: This Technical Specification describes a methodology for the selection of design occupant behavioural scenarios that are severe but credible for use in deterministic fire safety engineering analyses of any built environment including buildings, structures, or transportation vehicles. Occupant behavioural scenarios are linked to design fire scenarios. Guidance on the selection of design fire scenarios and design fires is covered in ISO 16733-1. The steps in ISO 16733-1 are followed in this Technical Specification with life safety of the occupants as the single fire safety objective under consideration. ISO/TR 16738 provides information on methods for the quantification of the different aspects of human evacuation behaviour in a design context. One part of that process involves the selection of occupant behavioural scenarios. This Technical Specification provides guidance for that aspect of the evaluation of an egress design. This Technical Specification addresses behaviours that occur after fire ignition and does not deal with behaviours that influence fire ignition.