ISO TS 6336-20-2022 PDF

ISO TS 6336-20-2022 PDF

Calculation of load capacity of spur and helical gears-Part 20: Calculation of scuffing load capacity-Flash temperature method

$60.00 $120.00 -50%
Product Code: ISO TS 6336-20
Stock In Stock
Edition: 2ND
Published: 05/2022
Number of Pages: 42
File Size: 1 file, 2 Bytes

Available Options

Product Description

Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 20: Calcul de la capacité de charge au grippage (applicable également aux engrenages conique et hypoïde) - Méthode de la température-éclair

Introduction: The ISO 6336 series consists of International Standards, Technical Specifications (TS) and Technical Reports (TR) under the general title Calculation of load capacity of spur and helical gears (see Table 1). — International Standards contain calculation methods that are based on widely accepted practices and have been validated. — TS contain calculation methods that are still subject to further development. — TR contain data that is informative, such as example calculations. The procedures specified in ISO 6336-1 to ISO 6336-19 cover fatigue analyses for gear rating. The procedures described in ISO 6336-20 to ISO 6336-29 are predominantly related to the tribological behaviour of the lubricated flank surface contact. ISO 6336-30 to ISO 6336-39 include example calculations. The ISO 6336 series allows the addition of new parts under appropriate numbers to reflect knowledge gained in the future. Requesting standardized calculations according to ISO 6336 without referring to specific parts requires the use of only those parts that are currently designated as International Standards (see Table 1 for listing). When requesting further calculations, the relevant part or parts of ISO 6336 need to be specified. The use of a technical specification as acceptance criteria for a specific design needs to be agreed in advance between the manufacturer and the purchaser. Table 1 — Overview of ISO 6336 Calculation of load capacity of spur and helical gears International Standard Technical Speci

Scope: This document specifies methods and formulae for evaluating the risk of scuffing, based on Blok's contact temperature concept. The fundamental concept is applicable to all machine elements with moving contact zones. The flash temperature formulae are valid for a band-shaped or approximately band-shaped Hertzian contact zone and working conditions characterized by sufficiently high Péclet numbers.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 6336-20-2022 PDF

ISO TS 6336-20-2022 PDF

$60.00 $120.00