ISO TS 10128-2023 PDF

ISO TS 10128-2023 PDF

Graphic technology-Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data

$71.50 $143.00 -50%
Product Code: ISO TS 10128
Stock In Stock
Edition: 2.
Published: 11/2023
Number of Pages: 22
File Size: 1 file, 1 Byte

Available Options

Product Description

Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data

Introduction: Today, with digital data input, it is recognized that modification of that digital data can be used to compensate (adjust) for some of the differences in press, ink and paper between various printing sites and between the actual conditions at a specific site and the reference or standard printing condition. As part of the introduction of digital technology, the printing industries (and its standards activities) have established reference characterization data corresponding to various printing specifications and conditions. Characterization data is generally defined as the relationship between the CMYK digital input values (in the data file exchanged) and the measured colorimetric values for the colour printed in response to these values. Four general methods have been identified by which compensation for differences in printing conditions can be accomplished. Three of these make use of individual one-dimensional transforms (also known as plate curves) for each printing channel but differ in the method by which these transforms are determined. These are referred to as matching of tone value curves, use of near-neutral scales and colour optimised correction curve sets. The fourth method makes use of multi-dimensional transforms such as International Color Consortium (ICC) device-link profiles. The features and general methodology for use of these adjustment techniques is the subject of this document. The goal is to provide a common understanding of these procedures across the i

Scope: This document describes four methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number of presses printing to the same general aim conditions. These four methods are generally identified as: 1) matching of tone value curves (TVI and CTV), 2) use of near-neutral scales, 3) colour-optimised correction curve set, and 4) use of CMYK to CMYK multi-dimensional transforms. The procedures for establishing the aim condition for the necessary correction curves, the procedures for determining the individual correction curves, and a comparison of the applicability of these four methods are included. These adjustment procedures are intended for use with printing systems that use CMYK colourants. Such systems are not restricted to those that use traditional ink on paper printing but can involve other marking technologies such as those used for proofing and/or digital printing.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 10128-2023 PDF

ISO TS 10128-2023 PDF

$71.50 $143.00