PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 2: Compatibility
Introduction: This International Standard provides minimum design and performance requirements for personal protective equipment (PPE) worn by firefighters to reduce injury and/or the loss of life. Amongst other hazards faced by firefighters is exposure to high thermal loads and to flames. This International Standard details the design and performance requirements for the various items of PPE covered in all parts and for the compatibility of items of PPE when worn together. This International Standard specifies design and performance requirements for the compatibility of ISO 11999‑3, ISO 11999‑4, ISO 11999‑5, ISO 11999‑6, ISO 11999‑7, ISO 11999‑8, ISO 11999‑9, and ISO 11999‑10 when all items covered in this International Standard are worn together, thereby creating an ensemble standard. All items have to meet the general requirements for marking and manufacturer’s instructions (ISO 11999‑1), as well as the specific marking and manufacturer’s instructions of the respective parts of ISO 11999. Under best practice for health and safety procedures, prior to choosing any PPE, a risk assessment of the workplace is carried out. Where hazards are identified and cannot be removed from a workplace, the items of PPE chosen to protect the personnel need to be fit for their intended use while allowing the personnel to carry out the work required of them. In environments where firefighters may be required to work, not only must the PPE protect the firefighters while enabling them to achieve their object
Scope: This Technical Specification describes compatibility for ensembles of firefighters personal protective equipment (PPE) to be used by firefighters, who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures. This Technical Specification includes methods for compatibility testing in laboratories and procedures for compatibility testing including the identification of any limitations to be performed by wearers. NOTE Where the presence of more than one risk to health and safety makes it necessary to wear or use simultaneously more than one item of personal protective equipment, such equipment is compatible and continues to be effective against the risk or risks in question.