Qualification of casing connections for thermal wells
Introduction: This document, also known to industry users as Thermal Well Casing Connection Evaluation Protocol (TWCCEP), is intended to facilitate assessment and qualification of threaded casing connections for service in intermediate or production casing strings in thermal recovery wells and in other wells experiencing significant temperature excursions such as in geothermal applications. The extensive effort involved in replicating thermal well field conditions in a laboratory environment limits the extent of physical testing that can reasonably be undertaken in an evaluation program. The evaluation procedure adopted in this document balances technical rigor and practicality to provide a baseline level of confidence in the candidate connection’s performance. Connection users should consider the scope of this evaluation and appropriate additions to address operation-specific conditions. Successful field use of a connection meeting the requirements of this protocol does not preclude an operator’s need to employ appropriate product quality assurance measures and field operating practices. Only outcomes of the performed full-scale tests are compared with assessment criteria to determine suitability of the candidate connection for the intended field service. While this document aims to enable a statistically significant full-scale test, it does not demand a rigorous check of a true statistical placement of the tested sample responses relative to field connection performance, and thus inheren
Scope: This document provides procedures for assessment of casing connections for those field applications in which the operating temperatures cyclically vary between minimum values appreciably below 180 °C and maximum values that range from 180 °C to 350 °C or above, and in which the primary axial loading on the casing-connection system is strain-based and driven by constrained thermal expansion and leads to a stress state that exceeds the casing-connection system's yield envelope. NOTE This document can be considered complementary to ISO 13679 (and its core content per API Specification 5C5), which applies to classic elastic-design applications. This document contains an evaluation procedure for a candidate connection comprising of uniquely defined pin, box and interfacial components. The evaluation procedure includes: — Material property tests to assess relevant properties of the candidate connection pin and box components; — Analytical tasks to determine configuration of connection samples for physical tests, which are chosen based on worst-case combinations of the connection geometry and material properties; — Full-scale testing tasks to measure the candidate connection galling resistance, structural integrity and sealability under loading representative of connection assembly and thermal well service. This document does not address impacts of external pressure, incomplete lateral pipe support, rotational fatigue, formation-induced shear, or environmentally-induced corrosion or cracking. Clause 6 describes fundamental assumptions adopted in this document.