Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
Introduction: This document defines the terms, properties, and definitions for portions of a cutting tool that support one or more cutting items with defined cutting edges. Tool items include, but are not limited to, turning tools, milling tools, drilling tools, threading tools, etc. The purpose of this document is to provide a reference dictionary to support the use of the general information model defined in ISO 13399-1. A cutting tool with defined cutting edges is used on a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by the ISO 13399 series include, but are not limited to, everything between the workpiece and the machine tool. Information about inserts (e.g. regular and irregular shaped replaceable cutting items), solid tools (e.g. solid drill and endmill), assembled tools (e.g. boring bars, indexable drills, and indexable milling cutters), adaptors (e.g. milling arbor and drilling chuck), components (e.g. shims, screws, and clamps), and their relationships can be represented by the ISO 13399 series. The principles of the ISO 13399 series are given in Annex A; and possible assemblies of the components of a cutting tool are illustrated in Figure A.1. The objective of the ISO 13399 series is to provide the means to represent the information that describes cutting tools in a computer-sensible form that is independent from any particular computer system. The representation facilitates the processi
Scope: This document specifies a reference dictionary for tool items, together with their descriptive properties and domains of values. This document specifies a reference dictionary containing: — definitions and identifications of the classes of tool items and their features, with an associated classification scheme; — definitions and identifications of the data element types that represents the properties of tool items and their features; — definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of this document: — standard data that represent the various classes of tool items and tool item features; — standard data that represent the various properties of tool items and tool item features; — standard data that represent domains of values used for properties of tool items and tool item features; — definition of cutting operations; — definitions of reference systems for tool items and their properties; — one implementation method by which the standard data defined in this document can be exchanged. NOTE 1 The implementation method by which the standard data defined in this document can be exchanged is specified in ISO 10303-21. The following are outside the scope of this document: — specialized or expert knowledge in the design and use of cutting tools; — rules to determine what information should be communicated; — applications where these standard data can be stored or referenced; — implementation methods other than the one defined in this document by which the standard data can be exchanged and referenced; — information model for cutting tools; — definitions of classes and properties for cutting items; — definitions of classes and properties for adaptive items; — definitions of classes and properties for assembly items; TECHNICAL SPECIFICATION ISO/TS 13399-3:2021(E) © ISO 2021 – All rights reserved — definitions of classes and properties for connection systems; — definitions of classes and properties for reference systems. NOTE 2 The information model for cutting tools is defined in ISO 13399-1. NOTE 3 The definitions of classes and properties for cutting items, adaptive items, a