Earth-moving machinery and mobile road construction machinery — Worksite data exchange — Part 4: Worksite topographical data
Introduction: This document is the fourth part in a series of documents covering data communication involving earth- moving machinery, as defined in ISO 6165, on construction worksites. ISO 15143-1 defines the architecture of a worksite information system used to transfer information from the earth-moving machinery (EMM) to various users via the worksite information system. ISO 15143-2 defines the individual data elements in a data dictionary. This document is intended to be used in conjunction with ISO 15143-1 and ISO 15143-2. ISO/TS 15143-3 defines a set of data elements common to the status and health of EMM that is collected by multiple OEMs or third-party telematics suppliers and distributed over the internet to application software used to manage machine operation. ISO/TS 15143-3 focuses on data for management of a fleet of machines, independent of worksite, while this document focuses on data for management of a worksite and the assets specific to that worksite. Construction worksites vary greatly in size, tasks, complexity, and scope of work. Some worksites have more design models, stakeholders, tasks and local regulations than others. In addition, most worksites have different construction contractor companies involved in various phases of the construction process. Each company can use different technologies for executing tasks. Grade control is a common technology used for earth moving to enhance operator productivity by augmenting control of a machine’s working tool using a 3D d
Scope: This document specifies requirements for data exchange at the interface between earth-moving machinery, as defined in ISO 6165, mobile road construction machinery, as defined in ISO 22242, and the worksite information systems. It focuses on data for management of a worksite and the assets specific to that worksite. This document includes: a) methods of local position correction and localization, including standardization of RTK corrections; b) method of implementation of a common design model; c) types of data and methods of data exchange between servers. This includes application programming interfaces (APIs) to exchange data between servers regardless of vendor. These APIs focus on project data, as-built data, and production data. Field-equipment-to-server and machine-to-machine are not included. This document covers both hardware mounted on earth-moving equipment and field measurement equipment. This document does not define methods of on-machine data collection, on-machine communication protocol (e.g. CAN bus), wireless transmission of data to the vendor’s server, or wireless transmission of data directly between machines onsite. This document also does not include design software requirements or other areas related to building information management (BIM). Data formats and transfer methods from design software to the SMS are not in scope.