Graphic technology - Print quality requirements for printed matter - Part 2: Commercial print applications utilizing digital printing technologies
Introduction: 0.1 General When producing a colour reproduction, it is important that the persons responsible for data creation, colour separation, proofing and printing operations have previously agreed to a set of parameters that define the visual characteristics and other technical properties of the planned print product. It is equally important that they have agreed to the method that will be used to verify that the printed output meets these aims and tolerances. This document identifies the minimum essential metrics and optional metrics for analysing printing output produced for the general commercial print marketplace. This marketplace has evolved in recent years from using classical reproduction processes such as offset, letterpress, gravure, screen printing and flexography to include the many varied digital printing systems that are being developed to meet a wide range of potential needs depending on how the user chooses to prioritize speed, quality and cost. Along with and commensurate with this change has been a shift in technical emphasis from using quality control of the printing process and expecting statistically based predictable printing results to using colour management and other inherent measures of print quality directly on the printed page. ISO/TS 15311-1 helps identify these metrics. This document deals with the assessment of printed sheets and does not consider how the process of printing the sheets is controlled. For reference, those methods for process control for c
Scope: This document gives guidance to print buyers and other users of print for assessing printed products on isotropic substrates that are typically held at a viewing distance of 30 to 50 cm. It specifies the proper application of required, recommended and optional metrics, measurement methods and, where appropriate, reporting requirements in the general commercial market. Although this document is expected to be used primarily to measure prints from digital printing systems the metrics are general and may be applied to other kinds of print. This document does not provide process control aims or tolerances as these differ widely for different types of commercial applications.