ISO TS 15530-2-2026 PDF

ISO TS 15530-2-2026 PDF

Geometrical product specifications (GPS)-Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement-Part 2: Use of multiple workpiece orientations and calibrated simple standards

$129.00 $258.00 -50%
Product Code: ISO TS 15530-2
Stock In Stock
Edition: 1.
Published: 03/2026
Number of Pages: 58
File Size: 1 file, 8.3 MB

Available Options

Product Description

Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 2: Use of multiple workpiece orientations and calibrated simple standards

Introduction: This document is a geometrical product specification (GPS). It influences chain link G of the chain of standards on size, distance, form, orientation, location and run-out in the general GPS matrix (see Annex F). The ISO GPS matrix model given in ISO 14638 gives an overview of the ISO GPS system of which this document is a part. The fundamental rules of ISO GPS given in ISO 8015 apply to this document and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document, unless otherwise indicated. For more detailed information on the relation of this document to the GPS matrix model, see Annex F. Coordinate measuring systems (CMS) have become essential for verifying geometrical specifications in industry. According to the ISO 9000 series of standards, in a quality management system, the relevant measuring equipment is required to be calibrated against certified equipment having a known and valid relationship to internationally or nationally recognized standards, in order to establish traceability. According to ISO/IEC Guide 99, the International vocabulary of basic and general terms in metrology (VIM), a calibration comprises – besides the establishment of the relationship between the measured and the correct values of a quantity – the uncertainty evaluation in the final results (measurands) of the measurement task. However, evaluating the uncertainty for the numerous measurement tasks a CMS performs is often very complex. In these

Scope: This document describes a procedure for the evaluation of the uncertainty of measurements made with tactile Cartesian coordinate measuring machines (CMM). The measurement uncertainty evaluated in accordance with this document indicates the performance of the individual measurement operation, which is not the measuring capability nor test uncertainty when verifying the performance of the CMM against its maximum permissible errors (MPE).

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 15530-2-2026 PDF

ISO TS 15530-2-2026 PDF

$129.00 $258.00