Solid biofuels — Fuel specifications and classes — Part 9: Graded hog fuel and wood chips for industrial use
Introduction: The objective of the ISO 17225 series is to provide unambiguous and clear classification principles for solid biofuels; to serve as a tool to enable efficient trading of biofuels; to enable good understanding between seller and buyer as well as a tool for communication with equipment manufacturers. It also facilitates authority permission procedures and reporting. This document supports the use of graded hog fuel and wood chips for industrial heat and power generation applications, which require graded hog fuel and/or wood chips. NOTE 1 For individual contracts, ISO 17225-1 can be used. Although this document may be obtained separately, it requires a general understanding of the standards based on and supporting ISO 17225-1. It is recommended to obtain and use ISO 17225-1 in conjunction with this document. © ISO 2020 – All rights reserved
Scope: This document determines the fuel quality classes and specifications of graded hog fuel and wood chips for industrial use. It covers only hog fuel and wood chips produced from the following raw materials (see ISO 17225-1:—, Table 1): — 1.1 forest, plantation and other virgin wood; — 1.2 by-products and residues from wood processing industry; — 1.3.1 chemically untreated used wood; — 1.4 blends and mixtures. This document covers hog fuel, which is produced with blunt tools, and wood chips, which are produced with sharp tools. NOTE 1 1.2.2 By-products and residues from wood processing industry, which can include chemically treated material (e.g. glued, painted, laminated) are not allowed include halogenated organic compounds or heavy metals at levels higher than those in typical virgin material values (see Annex B in ISO 17225-1) or higher than typical values of the country of origin. NOTE 2 If class I4 includes chemically treated used wood (1.3.2), it can be only used in the installations permitted to use 1.3.2.