Respiratory protective devices — Performance requirements — Part 8: Special application chemical, biological, radiological and nuclear (CBRN) filtering and radiological-nuclear (RN) filtering RPD
Introduction: The personal protection requirements of personnel who respond to emergencies are recognised as being different from those of the regular workforce. With respect to response to incidents involving release of chemical, biological or radiological materials, or after nuclear events (CBRN events), specific requirements have to be established. The hazardous exposures occurring in such incidents can result in severe consequences for an improperly protected responder. Specifically, for the types of protection required: a) Protection levels need to be high for those in the vicinity of an incident. b) Materials used in construction of the equipment shall withstand permeation by highly aggressive chemicals. c) The range of chemical protection offered by filtering systems needs to be very broad, as the opportunity for assessment of the nature of the hazard ahead of the time of use of the equipment may be limited. d) The efficiency of particle filtration needs to be high to protect the equipment wearer against ingress of radioactive particulate matter or biological agents. These requirements in the ISO system are summarized in this document covering the special application CBRN. This document is an adjunct to other parts of ISO 17420 and should be read together with them. This document provides classification of equipment, performance requirements and specific test methods for respiratory protective devices (RPD) for use in CBRN response. Selection requirements are addressed in separate d
Scope: This document specifies the requirements for respiratory protective devices for use by workers during response to incidents involving chemical, biological radiological or nuclear (CBRN) materials used with intent to cause harm or in cases of accidental release outside traditional hazardous materials response categories. For the purposes of this document, all incidents described here are named CBRN incidents. This document is applicable to RPD for use by personnel in the following roles: — First responders: including police, fire service, emergency medical, search and rescue, sampling and detection teams. — Workers needed for specific roles during response (utility, transportation, service continuity). — Medical personnel working with casualties of CBRN incidents. — Responders to release incidents involving nuclear materials. — Non-emergency but CBRN-related roles. — Workers in need of protection during escape from a CBRN or radiological release incident. — Workers in need of protection from nuclear materials. The requirements for RPD use by the following groups are not addressed by this document: — Military personnel outside of first responder roles. — Children. — Animals. Requirements for the following are not covered by this document: — Collective protection systems including ventilated casualty/body bags. — Methods of and criteria for decontamination of RPD. — Disposal of used equipment. This document is focused on respiratory protection requirements, but it is recognised that CBRN RPD are always used as part of an ensemble with protective clothing. The total ensemble effectiveness is not covered by this document. TECHNICAL SPECIFICATION ISO/TS 17420-8:2021(E) © ISO 2021 – All rights reserved 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 16900-1, Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage ISO 16900-2, Respiratory p