ISO TS 19096-2023 PDF

ISO TS 19096-2023 PDF

Metallic materials-Instrumented indentation test for hardness and materials parameters-Evaluation of stress change using indentation force differences

$96.50 $193.00 -50%
Product Code: ISO TS 19096
Stock In Stock
Edition: 1.
Published: 11/2023
Number of Pages: 26
File Size: 1 file, 3 Bytes

Available Options

Product Description

Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences

Introduction: Residual stress is defined as the “locked-in” stress that exists in materials and structures independent of the presence of any external loads. The mechanisms that create residual stress are diverse and include non-uniform plastic deformation, surface modification and thermal gradients. Numerous techniques have been developed for evaluating residual stress, each with their own merits and drawbacks. Physical methods such as X-ray diffraction (XRD) and neutron diffraction are non- destructive tests based on measuring lattice parameters, and thus they are restricted to crystalline materials; in addition, they are sensitive to microstructure and to the test environment. On the other hand, destructive methods such as hole drilling and sectioning method let us quantify the residual stress mechanically and require no reference sample. However, these methods cannot avoid destruction of the sample and require a strain gauge attachment. Then the observed change in strain must be converted to the stress. The results of these methods for determining residual stress can differ because the residual stress sensing depth and area in each method are different. The hole-drilling measures the amount of strain relaxation caused by the removal of the hole material. The spatial resolution of the method is approximately the size of the hole (typically 2 mm diameter). In case of XRD, the smaller size of irradiated area requires a longer measurement time. The indentation method requires less precise

Scope: This document specifies the method of instrumented indentation test for evaluation of stress change between reference and target states using indentation force differences. This document primarily applies to measuring the stress change in a specific location and the stress difference between different locations.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 19096-2023 PDF

ISO TS 19096-2023 PDF

$96.50 $193.00