ISO TS 19264-1-2017 PDF

ISO TS 19264-1-2017 PDF

Photography - Archiving systems - Image quality analysis - Part 1: Reflective originals

$60.00 $120.00 -50%
Product Code: ISO TS 19264-1
Stock In Stock
Edition: 1ST
Published: 04/2017
Number of Pages: 64
File Size: 1 file, 2.3 MB

Available Options

Product Description

Photography - Archiving systems - Image quality analysis - Part 1: Reflective originals

Introduction: Electronic imaging systems, such as scanners and cameras, can be used for digitizing physical records, e.g. documents, pictures, maps. The resulting digital images can be more or less accurate in terms of how well they reproduce the original record’s tones, colours, details, etc. These and other characteristics of a digital image can be assessed by imaging systems quality analysis. In general, the achievable accuracy of digital reproductions depends on the nature of the original record and the digitization, especially the performance of the imaging system and the applied system settings. In some organizations, e.g. within the archiving and cultural heritage field, where considerable resources are put into digitization projects, it is key to ensure that the required imaging systems quality is met and that it is consistent. To this end, imaging systems quality analysis can assist those developing or acquiring imaging systems with the assessment and verification of system performance, such as the specified resolution and dynamic range of a scanner, and the comparative performance of different imaging systems. Imaging systems quality analysis is also used for setting up and calibrating imaging systems as well as for enhancing their performance. Finally, imaging systems quality analysis is used for assessing accuracy and controlling imaging consistency over time. Note, that while the need to ensure imaging systems quality is generic, the required level of imaging systems quality a

Scope: This document describes a method for analysing imaging systems quality in the area of cultural heritage imaging. The method described analyses multiple imaging systems quality characteristics from a single image of a specified test target. The specification states which characteristics are measured, how they are measured, and how the results of the analysis need to be presented. This specification applies to scanners and digital cameras used for digitization of cultural heritage material. NOTE This document addresses imaging of reflective originals, a future part two will address imaging of transparent originals.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 19264-1-2017 PDF

ISO TS 19264-1-2017 PDF

$60.00 $120.00