ISO TS 19620-2018 PDF

ISO TS 19620-2018 PDF

Water quality - Determination of arsenic(III) and arsenic(V) species - Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICPMS) or hydride generation atomic fluorescence spectrometry (HG-AFS)

$129.00 $258.00 -50%
Product Code: ISO TS 19620
Stock In Stock
Edition: 1ST
Published: 01/2018
Number of Pages: 48
File Size: 1 file, 2 Bytes

Available Options

Product Description

Water quality - Determination of arsenic(III) and arsenic(V) species - Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICPMS) or hydride generation atomic fluorescence spectrometry (HG-AFS)

Introduction: In the environment, metals and metalloids are found in the form of various chemical species. Chemical speciation makes it possible to identify and quantify these different species. For the same metal or metalloid, given that the toxicity of each compound may vary significantly, it can be useful to quantify each of the species present in a given sample. For arsenic, the toxicity of the various species varies considerably; inorganic species are recognized as being more toxic than organic species and, for example, the toxicity of As(III) is greater than that of As(V). This method is primarily applicable to the determination of arsenite (As(III)) and arsenate (As(V)) as these are the main species of interest and are the predominant species found in potable water samples from the underlying geological strata in many parts of the world. Arsenic speciation measurements are important to establish and select the best water treatment technology for arsenic removal from raw waters containing significant levels of arsenic. © ISO 2018 – All rights reserved

Scope: This document specifies a method primarily developed for the determination of inorganic arsenic species (arsenite (As(III)) and arsenate (As(V)) dissolved in a sample after a preservation process in waters with a low total organic carbon content such as potable water, tap water, surface waters, ground waters and rain waters. Information is provided on the determination of potentially relevant organo-arsenic species such as methylarsonic acid (MMA) and dimethylarsinic acid (DMA) which may be encountered at very low levels in natural surface waters. The linear working dynamic range depends on the operating conditions and the method of detection used; under standard conditions, it typically ranges from 0,5 µg/l to 50 µg/l for each species. Samples containing arsenic at concentrations higher than the linear dynamic range can be analysed after suitable dilution. This method is based on high performance liquid chromatography separation of arsenic species with either inductively coupled mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS) as a method of detection. The sensitivity of this method depends on the method of detection and the instrumental operating conditions selected. The limit of quantification (LOQ) of the method also depends on the operating conditions of the analytical system used and the extent of the calibration range used. LOQ examples for As(III) and As(V) are provided; LOQs are generally less than 1 µg/l. This document does not apply to arsenobetaine and other organic arsenic species which are not present in natural water samples.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 19620-2018 PDF

ISO TS 19620-2018 PDF

$129.00 $258.00