ISO TS 20460-2015 PDF

ISO TS 20460-2015 PDF

Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges

$71.50 $143.00 -50%
Product Code: ISO TS 20460
Stock In Stock
Edition: 1ST
Published: 11/15/2015
Number of Pages: 26
File Size: 1 file, 339 Bytes

Available Options

Product Description

Papiers et cartons - Essais en ligne automatisés - Comparabilité métrologique entre mesures normalisées et résultats de jauges en continu

Introduction: There are two concepts discussed in this Technical Specification, calibration and correlation. The calibration process compares the output of an instrument to primary standards having known measurement characteristics. Correlation, in the context of this Technical Specification, is the degree of association between the quality control laboratory and the online sensor.[20] Online gauge users are looking to evaluate the capability (in a SPC “Statistical Process Control” sense) of their equipment. This is done usually through a measuring process which mixes a calibration process of the gauge itself, as presented in 4.1, and a correlation process with laboratory equipment, as presented in 4.2. The requirements for online measuring equipment and its measurement process in the context of paper and board manufacturing is discussed in 4.1. Usual acceptable tolerances for the instrument itself and for the process to be measured are given. The gauge itself may regularly be verified automatically through a so-called “automatic standardization” or “internal standardization”. A “static calibration” often refers to an operation during which the gauge is removed from the moving web. A “dynamic calibration” often refers to an operation on the moving web, either in a fixed position or traversing. The requirements for periodic calibration procedures and for decision-making are given in 4.2. This type of verification is a correlation or a comparison between online and off-line measuring system.

Scope: This Technical Specification establishes guidelines to link and, where applicable, calibrate the online gauge, following laboratory measurement for a given paper and board property. Paper and board online measuring equipment is mostly based on different technology to that of laboratory equipment. Therefore, this Technical Specification specifies the International Standards to be chosen for the determination of physical properties of paper and board when measured online. It is applicable to all kind of paper and board. In case of dispute, the usual reference is the laboratory testing but the parties may decide that the online measurements are valid based on the application of this International Standard.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 20460-2015 PDF

ISO TS 20460-2015 PDF

$71.50 $143.00