Measurement of multiphase fluid flow
Introduction: The need for multiphase flow measurement in the oil and gas production industry has been evident for many years. Multiphase meters have been developed since the early eighties by research organizations, meter manufacturers, oil and gas production companies and others: different technologies and various combinations of technologies have been employed. Some technologies have been abandoned, whereas other meters have become commercially available: the number of applications and users is increasing. The first Norwegian Society for Oil and Gas Measurement (NFOGM) handbook of multiphase metering (hereafter simply called the Handbook) was published in 1995 (see Reference [16]). Since then, multiphase flow measurement has matured. New applications of multiphase flow meters (MPFMs) have emerged, from simply being a replacement for the conventional test separator shared by a number of wells, towards more compact and low-cost meters with application on a one-per-well basis and installations on shore, topside and subsea. Since multiphase flow metering technologies and applications had developed significantly since 1995, NFOGM updated the Handbook in 2003-5 to reflect these improvements and to make it the main guide for state-of-the-art multiphase flow measurement. That work was financed by NFOGM and The Norwegian Society of Chartered Technical and Scientific Professionals (Tekna). Following calls from industry to produce an ISO document, NFOGM very generously allowed ISO to use the Handb
Scope: This document establishes a common basis for, and assistance in, the classification of applications and multiphase meters, as well as guidance and recommendations for the implementation and use of such meters. The so-called in-line multiphase flow meters (MPFMs) that directly measure the oil, water and gas flow rates, as well as the partial- and full-separation MPFMs are the main focus of this document. Conventional two- or three-phase separators are not included in this document. Only limited reference is made to wet-gas meters, since although wet-gas flow is a subset of multiphase flow, wet-gas measurement is covered by ISO/TR 11583 and ISO/TR 12748.