Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Functional requirements, specifications and communication protocol
Introduction: Testing of collision avoidance systems, active safety functions and more advanced autonomous functions in vehicles require testing on proving grounds. The purpose is to expose the vehicle under test to potentially dangerous traffic situations in a safe manner. The evaluation is done during development, and in voluntary and mandatory test procedures. To orchestrate these traffic scenarios, various impactable targets representing traffic actors are controlled. The number of controlled targets may be one or many depending on the required traffic situation scenario. Several requirements are important ranging from safety, to position and speed precision, to logging capabilities. This document specifies requirements, functionality and a protocol allowing for multivendor target carrier systems to be controlled according to the required traffic situation scenario, to report expected information for logging purposes and other functions required.
Scope: This document specifies requirements, procedures and message formats for controlling and monitoring of test targets, used for testing of active safety functions and autonomous vehicles. The document specifies functionality and messaging for monitoring and controlling of test objects by a control centre facilitating an interoperable test object environment. This document defines a communication protocol which allows for the control centre to safely execute tests using test objects from multiple vendors. This document does not specify the internal architecture of the test object nor control centre. This document does not specify how testing of the vehicles shall be performed.
Contents:
- Introduction
- Scope
- 6.1 Function overview
- 6.2 Test object coordinate system
- 6.3 Test scenario coordinate system
- 6.4 Time requirements
- 6.5 Communication requirements and permissions
- 7.1 General
- 7.2 Local test object fence and global geofence
- 9.1 General
- 9.2 Control centre and test object states
- 9.3 Communication setup
- 9.4 Control functionalities