ISO TS 22247-2022 PDF

ISO TS 22247-2022 PDF

Optics and photonics-Effective numerical aperture of laser lenses-Definition and verification procedure

$71.50 $143.00 -50%
Product Code: ISO TS 22247
Stock In Stock
Edition: 1ST
Published: 04/2022
Number of Pages: 26
File Size: 1 file, 1.4 MB

Available Options

Product Description

Optics and photonics — Effective numerical aperture of laser lenses — Definition and verification procedure

Introduction: Lenses are used in the field of laser beam forming, typically for collimation of divergent radiation or for focusing collimated radiation to obtain very small spots. A distinction is made between rotational symmetric lenses on one hand and cylindrical lenses, which provide optical power only in one direction, on the other hand. Two crucial quality characteristics can be defined for such lenses: the trivial demand that the lenses should not clip the laser beam during propagation and the more sophisticated requirement, that they should not significantly increase the beam propagation factor of a traversing beam. If the divergence angle of the beam before or after the lens is large, the geometric form of the surfaces of the lens needs to be carefully designed to an aspherical or acylindrical form to fulfill the second requirement. The desired form of the surfaces depends on the intended use of the lens and the wavelength of the laser radiation. In fabrication and application of such lenses the following problems may arise, even in combination: — in fabrication of the lens the optimum surface form has not been reproduced; — the lens is applied to a laser beam with a different wavelength than the design wavelength. Non-well designed or non-well produced lenses or lenses applied to beams with wavelength for which the lens has not been designed may still be useful as long as the involved divergence angles are small enough. To account for this, an effective numerical aperture is defin

Scope: This document covers terms, definitions, and a verification procedure to characterize the ability of laser lenses to collimate divergent laser beams and to focus collimated laser to small spot sizes. The aim of this document is to give users reliable information on the applicability of laser lenses in the field of beam forming.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 22247-2022 PDF

ISO TS 22247-2022 PDF

$71.50 $143.00