ISO TS 22270-2026 PDF

ISO TS 22270-2026 PDF

Mechanical vibration-Practical guidance and requirements for the monitoring and measurement of hand-transmitted vibration on the hand, wrist or forearm

$96.50 $193.00 -50%
Product Code: ISO TS 22270
Stock In Stock
Edition: 1.
Published: 07/2026
Number of Pages: 30
File Size: 1 file, 860 KB

Available Options

Product Description

Mechanical vibration — Practical guidance and requirements for the monitoring and measurement of hand-transmitted vibration on the hand, wrist or forearm

Introduction: The objective of this document is to provide practical guidance and requirements for the monitoring and measurement of hand-transmitted vibration on the hand, wrist, or forearm. Wearables, MEMS (micro-electro-mechanical systems) transducers, and other technologies are widely available and routinely used for monitoring hand-arm vibration (HAV) exposure in the workplace. These systems and devices are robust, can be inexpensive and substantially smaller than traditional measurement systems on which standards such as ISO 5349-1 [1] and ISO 5349-2 [2] are based. These evolving technologies provide opportunities for practical in situ monitoring and measurements conducted over long periods of time, which can include the use of multiple machines and work processes. These new types of measurements can be at locations on the hand, wrist or forearm; away from the vibrating surface interface where vibration enters the hand. Formally, measurements away from the hand-machine interface do not comply with ISO 5349-1 [1]. For this reason, measurements away from the hand-machine interface should not replace ISO 5349-1 [1] measurement when, for example, fulfilling duties under national regulations for either workplace vibration exposures or machinery vibration emissions. Full conformity with ISO 5349-1 [1] is not always required, for example if the purpose is to reduce vibration exposures or for research applications [3]. However, devices using measurement on the body are available and are bein

Scope: This document provides guidance and requirements on the evaluation of daily exposures to hand-arm vibration in the workplace where measurement or monitoring systems are fitted to the hand, wrist, or arm. This document provides guidance and to equipment manufacturers on how to provide suitable information to users on the scope and limitations of their equipment. It also provides guidance to users on the practical use and validation of these systems for monitoring or measurement in the workplace. This document provides information on measurement methods that complement the methods required for ISO 5349-1 [1]. NOTE The methods described in this document are not meant to replace measurements carried out in accordance with ISO 5349-1 [1] when, for example, fulfilling duties under national regulations for either workplace vibration exposures or machinery vibration emissions.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 22270-2026 PDF

ISO TS 22270-2026 PDF

$96.50 $193.00