Recycling of rare earth elements — Methods for the measurement of rare earth elements in industrial waste and end-of-life products
Introduction: With technical advancement, rare earth elements (REEs) are increasingly important due to their importance in a number of applications, including green technologies. However, there are high supply risks arising from the dependence on a single source of extraction. Recycling and systemic management of rare earth elements are key issues for solving the waste and supply risks of REEs. In order to efficiently recycle and systemically manage rare earth elements, a standard measurement method of REEs in industrial wastes and end-of-life cycled products is needed. Industrial wastes and end-of-life products can be found in solid, solid-liquid mixture and liquid forms. For example, machining waste contains chips and flakes with coolant oils, greases and numerous other forms of aqueous and non-aqueous contaminants. Similarly, waste liquid slurries contain REEs, as in LEDs, and batteries contain numerous acids, bases etc. Furthermore, in order to verify the information provided by the producer about REEs in the waste, standardized measurement procedure is necessary. There are several scientific methods for quantitatively measure REEs in matters, such as X-ray fluorescence (XRF), inductively coupled plasma mass spectroscopy (ICP-MS), inductively coupled plasma optical emission spectroscopy (ICP-OES) and glow discharge mass spectrometry (GD-MS). However, these different characterization techniques often offer dissimilar measurement results depending on the composition and physical state of
Scope: This document provides measurement methods for quantifying rare earth elements (REEs) in industrial wastes and end-of-life products in solid, solid-liquid mixture or liquid forms. It provides an overview of sample preparation and measurement of REEs in industrial waste and end-of-life products. WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not address any safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices.