Graphic technology — Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers
Introduction: Instruments for the measurement of colour and colour difference have been in use since the middle of the 20th century. In the days before digital computers, converting spectral data into CIE tristimulus values was a difficult, manual operation. Additionally, the optics and electronic components were large and difficult to maintain. As a result, every instrument was supplied with a number of reference materials that could be used to assess the performance of the instrument or to adjust the operating parameters. These reference materials included coloured glass filters, rare earth glass filters, neutral density filters and porcelain on steel plaques. Concepts such as accuracy, precision, bias and reproducibility had special and unique applications to these instruments and reference materials. As the optical and electronic technologies improved, the instruments became smaller, more precise and more affordable. At the same time, the science of metrology matured to the point that the colour- measuring instrument’s performance out-paced the ability of the national testing laboratories to produce and certify standard materials suitable for testing. Modern optoelectronic instruments are more precise and more stable than the materials used to assess their performance. Thus, it has become problematic to determine if an instrument is within its factory specification or if two instruments produce results that are in agreement with each other. Several industries that produce coloured prod
Scope: This document describes procedures for the assessment and validation of the performance of an optical spectrometer intended for use in capturing the spectral reflectance factor or the spectral radiance factor of printed areas comprised of non-fluorescent or fluorescent materials, respectively. While it does not describe the application to transmitting materials directly, many of the procedures can be applied to transmitting systems by backing them with a reflective white backing material. This document does not address spectral measurements appropriate to other specific application needs, such as those used during the production of materials (e.g. printing paper and proofing media), which are well described by ISO standards under the jurisdiction of ISO/TC 6. It does not describe the special requirements for testing instruments that make in-process or online colour measurements.