Cranes — Safe use of high-performance fibre ropes in crane applications
Introduction: Recent developments of high-performance fibre ropes (HPFR) made from synthetic fibre have led to comparable strength with regard to steel wire ropes. The main advantages of using HPFR on cranes are: a) light weight (significant weight reduction); b) no environment pollution by grease (no re-lubrication); c) easy handling (faster and easier assembly/disassembly); d) robust spooling (increased tolerance for spooling failures). The use of HPFR on cranes has already started, however, there is limited experience with HPFR in comparison to the long-term application of steel wire ropes. For steel wire ropes, substantial experience over many decades covering both rope selection and discard criteria exists, which can be found in International Standards (e.g. ISO 16625 and ISO 4309). Currently, there is no standard available that deals with design and discard criteria for the use of HPFR on cranes. Therefore, this document has been developed based on the content of the FEM 5.024 guideline. The FEM 5.024 guideline was developed by the Fédération Européenne de la Manutention (FEM) as a joint project with various stakeholders in the industry. It is based on first experiences with mobile cranes and the requirements/limits in some cases can be specific to mobile cranes only. This document includes additional input from tower crane and electric overhead traveling crane manufacturers. Adaptation to other crane types or applications can be necessary. This document reflects the current knowledg
Scope: This document gives guidance for the safe use of high-performance fibre ropes (HPFR) in crane applications. This document also covers winch applications. The mention of crane applications implicitly includes winch applications. This document covers performance criteria and the necessary evaluation to enable selection of HPFR as well as best practice guidelines on procedures, testing and maintenance to safely operate HPFR in crane applications including provisions for assembly/disassembly. The performance criteria are related to tasks performed when using cranes as intended, including assembly/disassembly, operation and required checks and maintenance. This document does not deal with so-called hybrid ropes which are a combination of steel wire and high-performance fibres, where the load bearing capability is shared between steel wires and the high-performance fibre. This document does not deal with HPFR used for high risk applications (e.g. transport of hot molten metal).