ISO TS 24137-2023 PDF

ISO TS 24137-2023 PDF

Plain bearings-Surface modification by press fitting solid lubricants combined with micro dimple processing

$48.00 $96.00 -50%
Product Code: ISO TS 24137
Stock In Stock
Edition: 1.
Published: 02/2023
Number of Pages: 20
File Size: 1 file, 2 Bytes

Available Options

Product Description

Plain bearings — Surface modification by press fitting solid lubricants combined with micro dimple processing

Introduction: As a general surface modification method, heat treatment such as carburizing or nitriding, hard film coating by chemical vapour deposition (CVD) or physical vapour deposition (PVD), solid lubricant coating using a resin binder, etc. are used. However, these conventional surface modification methods have problems such as the need for a special device, insufficient adhesion strength of the coating film, etc. Therefore, the purpose of this document is to provide a method for forming a lubricating film firmly bonded to the base metal by a simple method. This document specifies surface modification method by a combination of processes capable of quickly processing with general purpose equipment in order to obtain excellent friction characteristics by a method excellent in mass production. © ISO 2023 – All rights reserved

Scope: This document specifies the method of surface modification that improves the friction characteristics of plain bearings, by press fitting a solid lubricant onto the bearing metal surface mechanically in combination with processing a lot of micro dimples on the surface.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO TS 24137-2023 PDF

ISO TS 24137-2023 PDF

$48.00 $96.00