Laser diffraction measurements — Good practice
Introduction: The laser diffraction technique has evolved such that it is now a dominant method for determination of particle size distributions (PSDs). The success of the technique is because it can be applied to a wide variety of particulate systems. The technique is fast and can be automated, and a variety of commercial instruments are available. Nevertheless, the proper use of the instrument and the interpretation of the results require caution. ISO 13320 has had multiple revisions to date and covers the principles of the technology and information on evaluating the accuracy of the instrument with a view to qualification. ISO 13320 does not, however, cover the use of the technology on samples in great detail, and therefore, this document is intended to be used in conjunction with ISO 13320, as this document provides practical advice for the measurement of real samples, guidance on obtaining consistent results with good quality data and data interpretation. © ISO 2024 – All rights reserved
Scope: This document gives guidance on the determination criteria for when laser diffraction is the most appropriate method for the analysis of samples, the appropriate preparation of samples, the verification of the correct functioning of instruments, the interpretation of data, and the assessment of data quality. This document focuses on the practical steps needed to obtain results of good quality, rather than on theoretical considerations, and covers not only the measurement of solid particles (in wet and dry measurement configurations), but also emulsions and bubbles. Result variation expectations of real samples are also considered in this document.