Lifts for the transport of persons and goods — Part 22: Prerequisites for certification of lifts, model lifts, lift components and lift functions
Introduction: 0.1 The objective of the ISO 8100 series of performance-based documents is stated in the Introduction to ISO 8100-20 and ISO/TS 8100-21. 0.2 ISO 8100-20 has established global essential safety requirements (GESRs) for lifts (elevators) by addressing hazards and safety risks that may be encountered on a lift (elevator). The GESRs state safety objectives that a lift (elevator) should achieve. 0.3 ISO/TS 8100-21 sets criteria for achieving conformity with safety requirements of GESRs by specifying global safety parameters (GSPs) that should be used and implemented, where applicable, in a lift (elevator) to eliminate hazards or mitigate safety risks addressed in the GESRs. 0.4 This document sets prerequisite requirements that must be fulfilled before applying for certification in accordance with ISO/TS 8100-23. 0.5 ISO/TS 8100-23 sets procedures for certification of lifts, model lifts, lift components and lift functions, and supplements related requirements of ISO/IEC 17065 for certification bodies for lifts (LCBs). 0.6 The ISO 8100 series of performance-based documents provides a process for conformity assessment and certification of lifts, model lifts, lift components and lift functions with the safety requirements specified in ISO 8100-20. It includes a structured methodology for establishing, documenting and demonstrating that necessary and appropriate protective measures are taken to eliminate hazards or sufficiently mitigate risks. This process is particularly useful for es
Scope: This document specifies prerequisite requirements for application for the certification of new lifts (elevators), model lifts, lift components and lift functions. NOTE Hereinafter in this document, the term “lift” is used instead of the term “elevator”.