RTCA DO-235C-2022 PDF
ASSESSMENT OF RADIO FREQUENCY INTERFERENCE RELEVANT TO THE GNSS L1 FREQUENCY BAND
- 3A-3-A Sanitary Standards
- 9000-9000 Store
- A3-Association for Advancing Automation
- A4A-Airlines for America
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ABCB-Australian Building Codes Board
- ABMA-American Bearing Manufacturers Association
- ABMA-BOILER-American Boiler Manufacturers Association
- ACC-American Chemistry Council
- ACGIH-American Conference of Governmental Industrial Hygienists
- ACI-American Concrete Institute
- AEIC-Association of Edison Illuminating Companies
- AES-Audio Engineering Society
- AFCEN-French Association
- AGA-American Gas Association
- AGMA-American Gear Manufacturers Association
- AHAM-Association of Home Appliance Manufacturers
- AHP-American Herbal Pharmacopoeia
- AHRI-Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI)
- AIA-Aerospace Industries Association
- AIAA-American Institute of Aeronautics and Astronautics
- AICHE-American Institute of Chemical Engineers
- AIHA-American Industrial Hygiene Association
- AISC-American Institute of Steel Construction
- ALI-American Ladder Institute
- ALPEMA-Aluminium Plate-Fin Heat Exchanger Manufacturers' Association
- AMCA-Air Movement and Control Association
- ANS-American Nuclear Society
- ANSI-American National Standards Institute
- ANSI/ANSLG-American National Standards Institute / American National Standard Lighting Group
- ANSI/NEMA-American National Standards Institute / National Electrical Manufacturers Association
- ANSI/TCNA-Tile Council of North America, Inc.
- ANSI/UAMA-Unified Abrasives Manufacturers' Association
- API-American Petroleum Institute
- APWA-American Public Works Association
- AREMA-American Railway Engineering and Maintenance-of-Way Association
- ARINC-ARINC Industry Activities
- ARMY-United States Army Publication
- AS-Standards Australia
- ASA-Acoustical Society of America Standards
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASD-STAN prEN-ASD-STAN Standardization
- ASHE-American Society for Healthcare Engineering
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASIS-ASIS International
- ASM-ASM International
- ASME-ASME International
- ASNT-The American Society for Nondestructive Testing
- ASQ-American Society for Quality
- ASSE (Plumbing)-American Society of Sanitary Engineering
- ATIS-The Alliance for Telecommunications Industry Solutions
- ASTM-ASTM International
- AVIXA-Audiovisual and Integrated Experience Association
- AWC-American Wood Council
- AWI-Architectural Woodwork Institute
- AWS-American Welding Society
- AWWA-American Water Works Association
- AWPA-American Wood Protection Association
- B11-B11 Standards, Inc.
- BHMA-Builders Hardware Manufacturers Association
- BICSI-BICSI, A Telecommunications Association
- BioWorld-Thomson Reuters BioWorld
- BMI-Battelle - Metallic Materials Properties Development and Standardization (MMPDS)
- BS-BSI Group
- CAN/CGSB-Canadian General Standards Board
- CAN/ULC-Underwriters Laboratories of Canada
- CEI-Comitato Elettrotecnico Italiano
- CFR-Code of Federal Regulations
- CGA-Compressed Gas Association
- CIE-Commission Internationale de L'Eclairage
- CII-Construction Industry Institute
- CISPR-International Special Committee on Radio Interference
- CLSI-Clinical and Laboratory Standards Institute
- CMAA-Crane Manufacturers Association of America, Inc.
- CRANE-Crane Co.
- CRSI-Concrete Reinforcing Steel Institute
- CSA-Canadian Standards Association
- CTA-Consumer Technology Association (Formerly CEA)
- CTI-Cooling Technology Institute
- DANSK-Dansk Standard
- DID-Data Item Description
- DIN-Deutsches Institut Fur Normung E.V. (German National Standard)
- DNV-DNV
- DOD-Department of Defense
- DOXPUB-Doxpub, Inc.
- DVS-DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E.V.
- ECIA-Electronic Components Industry Association
- EEC-European Union Directives
- EEMUA-Engineering Equipment and Materials Users Association
- ESD-EOS/ESD Association, Inc.
- ETSI-European Telecommunications Standards Institute
- FCI-Fluid Controls Institute
- ISO-International Organization for Standardization
- ISO/IEC/IEEE-International Organization for Standardization / International Electrotechnical Commission / Institute of Electrical and Electronics Engineers
- ISPE-International Society for Pharmaceutical Engineering
- FED-Federal Specifications and Standards
- ISTA-International Safe Transit Association
- ISUZU-Isuzu Motors Ltd.
- FM Approvals-FM Approvals
- JEDEC-JEDEC Solid State Technology Association
- JSA-Japanese Standards Association (JIS Standards)
- LIA-Laser Institute of America
- FORD-Ford Motor Company
- MBMA-Metal Building Manufacturers Association
- MCGRAW-HILL-McGraw-Hill Publishing Company
- FRPI-Fiberglass Reinforced Plastics Institute, Inc.
- MIL-Military Specifications and Standards
- MPIF-Metal Powder Industries Federation
- MPMA-Motion + Power Manufacturers Alliance (MPMA) (Formerly AGMA & ABMA)
- GMW-General Motors Worldwide
- MSS-Manufacturers Standardization Society of the Valve and Fittings Industry
- NAAMM-National Association of Architectural Metal Manufacturers
- GPA-GPA Midstream Association
- NACE-National Association of Corrosion Engineers
- NADCA-National Air Duct Cleaners Association
- NAS-Aerospace Industries Association - National Aerospace Standard
- HEI-Heat Exchange Institute
- NASA-National Aeronautics and Space Administration
- NBBI-The National Board of Boiler and Pressure Vessel Inspectors
- NCSL-National Conference of Standards Laboratories International
- HFES-Human Factors and Ergonomics Society
- NECA-National Electrical Contractors Association
- RTCA-RTCA, Inc.
- HI-Hydraulic Institute
- NEMA-National Electrical Manufacturers Association
- NETA-InterNational Electrical Testing Association
- NFPA (Fire)-National Fire Protection Association
- HIR-H.I.R. Technical Services
- NFPA (Fluid)-National Fluid Power Association
- NFSI-National Floor Safety Institute
- HPS-Health Physics Society
- NGA-National Glass Association
- NISO-National Information Standards Organization
- NORSOK-NORSOK
- I3A-International Imaging Industry Association
- NRC-National Research Council Canada
- NSC-Natural Stone Council
- IADC-International Association of Drilling Contractors
- NSF-NSF International
- NZS-Standards New Zealand
- OPEI-Outdoor Power Equipment Institute
- IAPMO-International Association of Plumbing and Mechanical Officials
- PCI-Precast/Prestressed Concrete Institute
- PDA-Parenteral Drug Association
- IATA-International Air Transport Association
- PEI-Petroleum Equipment Institute
- PFI-Pipe Fabrication Institute
- PIA-Parachute Industry Association
- ICAO-International Civil Aviation Organization
- PIP-Process Industry Practices
- PPI-Plastics Pipe Institute
- ICC-International Code Council
- PTI-Post-Tensioning Institute
- ICEA-Insulated Cable Engineers Association
- ICML-International Council for Machinery Lubrication
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- IES-Illuminating Engineering Society
- IEST-Institute of Environmental Sciences and Technology
- IFI-Industrial Fasteners Institute
- IICRC-Institute of Inspection, Cleaning and Restoration Certification
- INCITS-InterNational Committee for Information Technology Standards (formerly NCITS)
- INTERN-International Motors, LLC (Formerly NAVISTAR)
- IPC-IPC by Global Electronics Association
- ISA-International Society of Automation
- ISEA-International Safety Equipment Association
- SAE-SAE International
- SAIA-Scaffold & Access Industry Association
- SCTE-Society of Cable Telecommunication Engineers
- SDI-Steel Door Institute
- SES-The Society for Standards Professionals
- SIA-Security Industry Association
- SJI-Steel Joist Institute
- SMACNA-Sheet Metal and Air Conditioning Contractors' National Association
- SME-Society of Manufacturing Engineers
- SMPTE-Society of Motion Picture and Television Engineers
- SN EN-Standards Norway EN
- SPC-Standards Press of China
- SPI-Society of the Plastics Industry
- SSPC-Society for Protective Coatings
- STI/SPFA-Steel Tank Institute/Steel Plate Fabricators Association
- TAPPI-Technical Association of the Pulp and Paper Industry
- TCIA-Tree Care Industry Association
- TEMA-Tubular Exchanger Manufacturers Association
- THHILL-TH Hill Associates, Inc.
- TIA-Telecommunications Industry Association
- TMS-The Masonry Society
- UL-Underwriters Laboratories
- ULC-Underwriters Laboratories of Canada
- UNE-Asociación Española de Normalización
- WILEY-John Wiley and Sons
- WRC-Welding Research Council, Inc.
- WSPC-World Scientific Publishing Co.
- X9-Accredited Standards Committee X9 Incorporated
Your shopping cart is empty!
Product Description
INTRODUCTION Background The RTCA Task Force #1 Report on the Global Navigation Satellite System (GNSS) Transition and Implementation Strategy (September 1992) recommended that “the FAA should base GNSS initial operational implementation on the use of the U.S. GPS (Global Positioning System) national resource and appropriate augmentations”. The Task Force also recommended that RTCA develop initial standards that will be used to certify GNSS equipment for operational use. The accuracy, integrity, availability and continuity of satellite-based navigation must be assured before it can be adopted into safety of life aviation use. Radio frequency interference (RFI) is a factor that potentially degrades system performance and one that must be examined with care. RTCA SC-159 Working Group 6 was created to investigate radio-frequency interference issues, and appropriate mitigation alternatives, relevant to GNSS. The original Terms of Reference for this group were to: Develop quantitative assessments of the current and projected RF interference (RFI) environment Recommend measures to reduce RFI at the source where it is technically feasible and cost-effective to do so Develop updated interference rejection criteria for future GNSS receivers that will enable them to satisfy required navigation performance in the near future RFI environment Develop an out-of-band emissions mask for adjacent-band Mobile Satellite System mobile Earth terminals The original GNSS L1 RFI environment assessment by RTCA (RTCA DO-235), completed in late 1996, identified potential sources of RFI and assessed the vulnerability of GNSS receivers (particularly GPS) to that interference. The original assessment was motivated by a number of factors. These included sporadic GPS interference trouble reports from various RFI sources, the potential RFI from new sources in adjacent frequency bands, and the need to identify appropriate mitigation measures for flight-critical GNSS applications. Out of the original assessment work came susceptibility requirements for RTCA DO-229 GPS/SBAS airborne receiver standard, two proposals for “Big-LEO” Mobile Satellite Service transmitter emission requirements, and several other key findings. In October 1999 at Department of Transport (DOT) request, the RTCA undertook to investigate the RFI environment near the GPS L5 frequency (1176.45 ± 12 MHz) and determine appropriate receiver susceptibility criteria and related RFI unwanted emission limits for the use with new civil signal. Aviation-related issues were acknowledged to be of primary importance, but the group was to seek significant involvement and input from non-aviation public safety applications (e.g., maritime, E-911, police, fire fighting). By June 2000 the regulatory and business activity pace had intensified on ultra-wideband (UWB) transmission technology. As a result, the DOT requested the RTCA enlarge the study to explicitly treat UWB RFI effects and operational scenarios for the GPS L1 frequency as well as L5. Additional terms were added in mid-2000 to address certain issues with UWB and other new RFI sources and proposed new operational uses. They were: Develop RFI encounter scenarios for new aeronautical and non-aeronautical public safety operations with GPS receivers, review and revise current scenarios as required; Assess the potential for RFI to GPS receivers from proposed unlicensed UWB transmitters and recommend suitable emission limits and other associated mitigations for use by the FAA and DOT in FCC rulemaking proceedings; Update, as required, the assessment of existing and new L1 RFI sources, the existing GPS receiver susceptibility standards, and other RFI mitigation means to aid evolving aeronautical GNSS development. As a result, WG-6 put its L5 work aside temporarily in order to deal with the more urgent issue of UWB effects on GPS L1. That decision focused the work on both UWB and as well as other L1 issues added in mid-2000. This work was captured in the publication of RTCA DO-235A in December 2002. That report addressed aeronautical GPS RFI encounter scenarios, risk modeling, began to address Cat II/III scenarios, and the effects of personal electronic devices carried on-board aircraft. It also evaluated GPS intrasystem interference from C/A, Y and M codes, utilizing the concepts of spectral separation and critical satellite. The work next shifted to GPS L5, which resulted in the publication of RTCA DO-292 in July 2004. Pursuant to the development of DO-292, WG6 performed an update to DO-235A and this addressed (for GPS L1) new operational scenarios that were patterned after the DO-292 link analyses , improved aggregate terrestrial RFI modeling, updated analyses of OOB pulsed RFI effects on GPS receivers at L1 and addressed new RFI sources (such as transmitting portable electronic devices (T-PED’s)) and GPS re-radiators. All these updates were captured as part of DO-235B. Since 2008, there have been multiple planned aviation GNSS developments/updates that necessitated yet another update to DO-235 and this body of work was commissioned to address the same. Details regarding the scope of this update can be seen under report objectives in Section 1.2.



