RTCA DO-366B-2025 PDF
Minimum Operational Performance Standards (MOPS) for Air-to-Air Radar for Traffic Surveillance
- 3A-3-A Sanitary Standards
- 9000-9000 Store
- A3-Association for Advancing Automation
- A4A-Airlines for America
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ABCB-Australian Building Codes Board
- ABMA-American Bearing Manufacturers Association
- ABMA-BOILER-American Boiler Manufacturers Association
- ACC-American Chemistry Council
- ACGIH-American Conference of Governmental Industrial Hygienists
- ACI-American Concrete Institute
- AEIC-Association of Edison Illuminating Companies
- AES-Audio Engineering Society
- AFCEN-French Association
- AGA-American Gas Association
- AGMA-American Gear Manufacturers Association
- AHAM-Association of Home Appliance Manufacturers
- AHP-American Herbal Pharmacopoeia
- AHRI-Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI)
- AIA-Aerospace Industries Association
- AIAA-American Institute of Aeronautics and Astronautics
- AICHE-American Institute of Chemical Engineers
- AIHA-American Industrial Hygiene Association
- AISC-American Institute of Steel Construction
- ALI-American Ladder Institute
- ALPEMA-Aluminium Plate-Fin Heat Exchanger Manufacturers' Association
- AMCA-Air Movement and Control Association
- ANS-American Nuclear Society
- ANSI-American National Standards Institute
- ANSI/ANSLG-American National Standards Institute / American National Standard Lighting Group
- ANSI/NEMA-American National Standards Institute / National Electrical Manufacturers Association
- ANSI/TCNA-Tile Council of North America, Inc.
- ANSI/UAMA-Unified Abrasives Manufacturers' Association
- API-American Petroleum Institute
- APWA-American Public Works Association
- AREMA-American Railway Engineering and Maintenance-of-Way Association
- ARINC-ARINC Industry Activities
- ARMY-United States Army Publication
- AS-Standards Australia
- ASA-Acoustical Society of America Standards
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASD-STAN prEN-ASD-STAN Standardization
- ASHE-American Society for Healthcare Engineering
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASIS-ASIS International
- ASM-ASM International
- ASME-ASME International
- ASNT-The American Society for Nondestructive Testing
- ASQ-American Society for Quality
- ASSE (Plumbing)-American Society of Sanitary Engineering
- ATIS-The Alliance for Telecommunications Industry Solutions
- ASTM-ASTM International
- AVIXA-Audiovisual and Integrated Experience Association
- AWC-American Wood Council
- AWI-Architectural Woodwork Institute
- AWS-American Welding Society
- AWWA-American Water Works Association
- AWPA-American Wood Protection Association
- B11-B11 Standards, Inc.
- BHMA-Builders Hardware Manufacturers Association
- BICSI-BICSI, A Telecommunications Association
- BioWorld-Thomson Reuters BioWorld
- BMI-Battelle - Metallic Materials Properties Development and Standardization (MMPDS)
- BS-BSI Group
- CAN/CGSB-Canadian General Standards Board
- CAN/ULC-Underwriters Laboratories of Canada
- CEI-Comitato Elettrotecnico Italiano
- CFR-Code of Federal Regulations
- CGA-Compressed Gas Association
- CIE-Commission Internationale de L'Eclairage
- CII-Construction Industry Institute
- CISPR-International Special Committee on Radio Interference
- CLSI-Clinical and Laboratory Standards Institute
- CMAA-Crane Manufacturers Association of America, Inc.
- CRANE-Crane Co.
- CRSI-Concrete Reinforcing Steel Institute
- CSA-Canadian Standards Association
- CTA-Consumer Technology Association (Formerly CEA)
- CTI-Cooling Technology Institute
- DANSK-Dansk Standard
- DID-Data Item Description
- DIN-Deutsches Institut Fur Normung E.V. (German National Standard)
- DNV-DNV
- DOD-Department of Defense
- DOXPUB-Doxpub, Inc.
- DVS-DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E.V.
- ECIA-Electronic Components Industry Association
- EEC-European Union Directives
- EEMUA-Engineering Equipment and Materials Users Association
- ESD-EOS/ESD Association, Inc.
- ETSI-European Telecommunications Standards Institute
- FCI-Fluid Controls Institute
- ISO-International Organization for Standardization
- ISO/IEC/IEEE-International Organization for Standardization / International Electrotechnical Commission / Institute of Electrical and Electronics Engineers
- ISPE-International Society for Pharmaceutical Engineering
- FED-Federal Specifications and Standards
- ISTA-International Safe Transit Association
- ISUZU-Isuzu Motors Ltd.
- FM Approvals-FM Approvals
- JEDEC-JEDEC Solid State Technology Association
- JSA-Japanese Standards Association (JIS Standards)
- LIA-Laser Institute of America
- FORD-Ford Motor Company
- MBMA-Metal Building Manufacturers Association
- MCGRAW-HILL-McGraw-Hill Publishing Company
- FRPI-Fiberglass Reinforced Plastics Institute, Inc.
- MIL-Military Specifications and Standards
- MPIF-Metal Powder Industries Federation
- MPMA-Motion + Power Manufacturers Alliance (MPMA) (Formerly AGMA & ABMA)
- GMW-General Motors Worldwide
- MSS-Manufacturers Standardization Society of the Valve and Fittings Industry
- NAAMM-National Association of Architectural Metal Manufacturers
- GPA-GPA Midstream Association
- NACE-National Association of Corrosion Engineers
- NADCA-National Air Duct Cleaners Association
- NAS-Aerospace Industries Association - National Aerospace Standard
- HEI-Heat Exchange Institute
- NASA-National Aeronautics and Space Administration
- NBBI-The National Board of Boiler and Pressure Vessel Inspectors
- NCSL-National Conference of Standards Laboratories International
- HFES-Human Factors and Ergonomics Society
- NECA-National Electrical Contractors Association
- RTCA-RTCA, Inc.
- HI-Hydraulic Institute
- NEMA-National Electrical Manufacturers Association
- NETA-InterNational Electrical Testing Association
- NFPA (Fire)-National Fire Protection Association
- HIR-H.I.R. Technical Services
- NFPA (Fluid)-National Fluid Power Association
- NFSI-National Floor Safety Institute
- HPS-Health Physics Society
- NGA-National Glass Association
- NISO-National Information Standards Organization
- NORSOK-NORSOK
- I3A-International Imaging Industry Association
- NRC-National Research Council Canada
- NSC-Natural Stone Council
- IADC-International Association of Drilling Contractors
- NSF-NSF International
- NZS-Standards New Zealand
- OPEI-Outdoor Power Equipment Institute
- IAPMO-International Association of Plumbing and Mechanical Officials
- PCI-Precast/Prestressed Concrete Institute
- PDA-Parenteral Drug Association
- IATA-International Air Transport Association
- PEI-Petroleum Equipment Institute
- PFI-Pipe Fabrication Institute
- PIA-Parachute Industry Association
- ICAO-International Civil Aviation Organization
- PIP-Process Industry Practices
- PPI-Plastics Pipe Institute
- ICC-International Code Council
- PTI-Post-Tensioning Institute
- ICEA-Insulated Cable Engineers Association
- ICML-International Council for Machinery Lubrication
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- IES-Illuminating Engineering Society
- IEST-Institute of Environmental Sciences and Technology
- IFI-Industrial Fasteners Institute
- IICRC-Institute of Inspection, Cleaning and Restoration Certification
- INCITS-InterNational Committee for Information Technology Standards (formerly NCITS)
- INTERN-International Motors, LLC (Formerly NAVISTAR)
- IPC-IPC by Global Electronics Association
- ISA-International Society of Automation
- ISEA-International Safety Equipment Association
- SAE-SAE International
- SAIA-Scaffold & Access Industry Association
- SCTE-Society of Cable Telecommunication Engineers
- SDI-Steel Door Institute
- SES-The Society for Standards Professionals
- SIA-Security Industry Association
- SJI-Steel Joist Institute
- SMACNA-Sheet Metal and Air Conditioning Contractors' National Association
- SME-Society of Manufacturing Engineers
- SMPTE-Society of Motion Picture and Television Engineers
- SN EN-Standards Norway EN
- SPC-Standards Press of China
- SPI-Society of the Plastics Industry
- SSPC-Society for Protective Coatings
- STI/SPFA-Steel Tank Institute/Steel Plate Fabricators Association
- TAPPI-Technical Association of the Pulp and Paper Industry
- TCIA-Tree Care Industry Association
- TEMA-Tubular Exchanger Manufacturers Association
- THHILL-TH Hill Associates, Inc.
- TIA-Telecommunications Industry Association
- TMS-The Masonry Society
- UL-Underwriters Laboratories
- ULC-Underwriters Laboratories of Canada
- UNE-Asociación Española de Normalización
- WILEY-John Wiley and Sons
- WRC-Welding Research Council, Inc.
- WSPC-World Scientific Publishing Co.
- X9-Accredited Standards Committee X9 Incorporated
Your shopping cart is empty!
Product Description
Introduction This document is the Revision B update to the Minimum Operational Performance Standards (MOPS) for Air-To-Air Radar (ATAR) for Traffic Surveillance (RTCA Document 366 (DO-366), referenced as RTCA DO-366B. This revision: • Adds a new radar class with smaller delay times • Allows for customizing range requirements to the ownship speed and maneuverability • Adds a discussion of radar clutter issues and zero intruder-closing-speed performance specifications • Updates verification process ATAR specifications were derived to meet the non-cooperative sensor requirements for Detect and Avoid (DAA) systems described in Minimum Operating Performance Standard (MOPS) for Detect and Avoid (DAA) Systems (DO-365C). They include support for multiple classes of aircraft and include collision avoidance functions as described in the MOPS for Airborne Collision Avoidance System Xu (ACAS Xu), RTCA DO-386. These standards specify the radar system characteristics that are useful for designers, manufacturers, installers, and equipment users. Compliance with these standards is recommended to ensure that the equipment will perform its intended function(s) satisfactorily under the conditions specified herein. Any regulatory application of this document is the sole responsibility of appropriate governmental agencies. Section 1 of this document provides information needed to understand the rationale for the equipment characteristics and requirements in Section 2. It describes typical equipment operations and operational goals as envisioned by the members of RTCA Inc. Special Committee (SC)-228 and establishes the basis for the standards stated herein. This section also provides definitions and assumptions essential to a proper understanding of this document. Section 2 contains the equipment requirements. These standards specify the required performance under standard environmental conditions. Also included are recommended bench test procedures to demonstrate equipment compliance with the stated minimum requirements. Section 3 describes the performance required of installed equipment. Tests for the installed equipment are included when performance cannot be adequately determined through bench testing. Section 4 contains aircraft operational performance characteristics. Section 5 contains an informative listing of SC-228 committee members who contributed to these MOPS. Appendix A contains information on the proposed frequency bands for the radar, and their regulatory status. Appendix B contains analysis and simulations that derive the required Radar Declaration Range (RDR) for all radar classes, categories of intruders and different encounter geometries between the ownship and intruders. This document version introduces a new radar class, B2, which was added to take advantage of higher maneuverability and lower delay times that can significantly reduce radar range requirements. RDR requirements can be customized to the dynamics of the ownship and the ownship speed ranges over which the radar will be required to operate. Two tailored B2 Radar Class examples are provided. Appendix C defines the conversion between the radar natural coordinate system and the coordinate system in Class B (ACAS Xu) radars. Appendix D provides information on the tracker required for Class B (ACAS Xu) radars, its description, equations and performance. Appendix E shows simulated results on the Radar Cross-Section (RCS) of different kinds of aircraft as guidance for radar design against expected intruders. Appendix F – Reserved. Appendix G provides validation of the Radar Declaration Range (RDR) against DAA alerting requirements for Class A1 and A2 (non-ACAS Xu, large and medium ownship). Appendix H provides validation of the RDR against DAA alerting requirements for Class A3 (non-ACAS Xu, small ownship). Appendix I analyzes the frequency of the cases where an intruder enters the radar Field of Regard (FOR) within the RDR for Class A1 and A2 Appendix J analyzes the frequency of the cases where an intruder enters the radar Field-of-Regard (FOR) within the RDR for Class A3. Appendix K explains ATAR ground clutter as well as stationary and moving nuisances that must be dealt with for the ATAR to achieve RDR performance across all high-priority intruder encounters (opening, closing, and zero closing speeds) within the limits of the relative altitude between the ownship and the intruder. It also addresses look-down clutter and intruder detection issues when determining ATAR’s minimum altitude for radar operation. Appendix L provides a list of acronyms and abbreviations used in this document. Appendix M contains two matrices: one for tracing Requirements to Test Procedures and one for tracing Test Procedures to Requirements. This document sets performance standards for ATAR for traffic surveillance as part of a DAA system to satisfy non-cooperative surveillance requirements. Separate MOPS were developed for the DAA system. 1 This version of the ATAR MOPS, DO-366B, supports the ATAR functions described in DO-365 and the ACAS Xu DO-386 MOPS. The earlier version, DO-366, supports the ATAR functions described in DO-365 and DO-365A. The basic radar functions, e.g., power ON/OFF, transmit power ON/OFF, are controlled by the remote pilot in the Control Station (CS). Similarly, the radar provides its status to the CS during operation. The CS sends commands to the radar and receives status from it. Tracks generated by the radar are sent to the DAA system for further processing. 1 Minimum Operational Performance Standards (MOPS) for Detect and Avoid (DAA) Systems, RTCA DO-365B



