RTCA AWP-2-2014 PDF
Command and Control (C2) Data Link White Paper
- 3A-3-A Sanitary Standards
- 9000-9000 Store
- A3-Association for Advancing Automation
- A4A-Airlines for America
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ABCB-Australian Building Codes Board
- ABMA-American Bearing Manufacturers Association
- ABMA-BOILER-American Boiler Manufacturers Association
- ACC-American Chemistry Council
- ACGIH-American Conference of Governmental Industrial Hygienists
- ACI-American Concrete Institute
- AEIC-Association of Edison Illuminating Companies
- AES-Audio Engineering Society
- AFCEN-French Association
- AGA-American Gas Association
- AGMA-American Gear Manufacturers Association
- AHAM-Association of Home Appliance Manufacturers
- AHP-American Herbal Pharmacopoeia
- AHRI-Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI)
- AIA-Aerospace Industries Association
- AIAA-American Institute of Aeronautics and Astronautics
- AICHE-American Institute of Chemical Engineers
- AIHA-American Industrial Hygiene Association
- AISC-American Institute of Steel Construction
- ALI-American Ladder Institute
- ALPEMA-Aluminium Plate-Fin Heat Exchanger Manufacturers' Association
- AMCA-Air Movement and Control Association
- ANS-American Nuclear Society
- ANSI-American National Standards Institute
- ANSI/ANSLG-American National Standards Institute / American National Standard Lighting Group
- ANSI/NEMA-American National Standards Institute / National Electrical Manufacturers Association
- ANSI/TCNA-Tile Council of North America, Inc.
- ANSI/UAMA-Unified Abrasives Manufacturers' Association
- API-American Petroleum Institute
- APWA-American Public Works Association
- AREMA-American Railway Engineering and Maintenance-of-Way Association
- ARINC-ARINC Industry Activities
- ARMY-United States Army Publication
- AS-Standards Australia
- ASA-Acoustical Society of America Standards
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASD-STAN prEN-ASD-STAN Standardization
- ASHE-American Society for Healthcare Engineering
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASIS-ASIS International
- ASM-ASM International
- ASME-ASME International
- ASNT-The American Society for Nondestructive Testing
- ASQ-American Society for Quality
- ASSE (Plumbing)-American Society of Sanitary Engineering
- ATIS-The Alliance for Telecommunications Industry Solutions
- ASTM-ASTM International
- AVIXA-Audiovisual and Integrated Experience Association
- AWC-American Wood Council
- AWI-Architectural Woodwork Institute
- AWS-American Welding Society
- AWWA-American Water Works Association
- AWPA-American Wood Protection Association
- B11-B11 Standards, Inc.
- BHMA-Builders Hardware Manufacturers Association
- BICSI-BICSI, A Telecommunications Association
- BioWorld-Thomson Reuters BioWorld
- BMI-Battelle - Metallic Materials Properties Development and Standardization (MMPDS)
- BS-BSI Group
- CAN/CGSB-Canadian General Standards Board
- CAN/ULC-Underwriters Laboratories of Canada
- CEI-Comitato Elettrotecnico Italiano
- CFR-Code of Federal Regulations
- CGA-Compressed Gas Association
- CIE-Commission Internationale de L'Eclairage
- CII-Construction Industry Institute
- CISPR-International Special Committee on Radio Interference
- CLSI-Clinical and Laboratory Standards Institute
- CMAA-Crane Manufacturers Association of America, Inc.
- CRANE-Crane Co.
- CRSI-Concrete Reinforcing Steel Institute
- CSA-Canadian Standards Association
- CTA-Consumer Technology Association (Formerly CEA)
- CTI-Cooling Technology Institute
- DANSK-Dansk Standard
- DID-Data Item Description
- DIN-Deutsches Institut Fur Normung E.V. (German National Standard)
- DNV-DNV
- DOD-Department of Defense
- DOXPUB-Doxpub, Inc.
- DVS-DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E.V.
- ECIA-Electronic Components Industry Association
- EEC-European Union Directives
- EEMUA-Engineering Equipment and Materials Users Association
- ESD-EOS/ESD Association, Inc.
- ETSI-European Telecommunications Standards Institute
- FCI-Fluid Controls Institute
- ISO-International Organization for Standardization
- ISO/IEC/IEEE-International Organization for Standardization / International Electrotechnical Commission / Institute of Electrical and Electronics Engineers
- ISPE-International Society for Pharmaceutical Engineering
- FED-Federal Specifications and Standards
- ISTA-International Safe Transit Association
- ISUZU-Isuzu Motors Ltd.
- FM Approvals-FM Approvals
- JEDEC-JEDEC Solid State Technology Association
- JSA-Japanese Standards Association (JIS Standards)
- LIA-Laser Institute of America
- FORD-Ford Motor Company
- MBMA-Metal Building Manufacturers Association
- MCGRAW-HILL-McGraw-Hill Publishing Company
- FRPI-Fiberglass Reinforced Plastics Institute, Inc.
- MIL-Military Specifications and Standards
- MPIF-Metal Powder Industries Federation
- MPMA-Motion + Power Manufacturers Alliance (MPMA) (Formerly AGMA & ABMA)
- GMW-General Motors Worldwide
- MSS-Manufacturers Standardization Society of the Valve and Fittings Industry
- NAAMM-National Association of Architectural Metal Manufacturers
- GPA-GPA Midstream Association
- NACE-National Association of Corrosion Engineers
- NADCA-National Air Duct Cleaners Association
- NAS-Aerospace Industries Association - National Aerospace Standard
- HEI-Heat Exchange Institute
- NASA-National Aeronautics and Space Administration
- NBBI-The National Board of Boiler and Pressure Vessel Inspectors
- NCSL-National Conference of Standards Laboratories International
- HFES-Human Factors and Ergonomics Society
- NECA-National Electrical Contractors Association
- RTCA-RTCA, Inc.
- HI-Hydraulic Institute
- NEMA-National Electrical Manufacturers Association
- NETA-InterNational Electrical Testing Association
- NFPA (Fire)-National Fire Protection Association
- HIR-H.I.R. Technical Services
- NFPA (Fluid)-National Fluid Power Association
- NFSI-National Floor Safety Institute
- HPS-Health Physics Society
- NGA-National Glass Association
- NISO-National Information Standards Organization
- NORSOK-NORSOK
- I3A-International Imaging Industry Association
- NRC-National Research Council Canada
- NSC-Natural Stone Council
- IADC-International Association of Drilling Contractors
- NSF-NSF International
- NZS-Standards New Zealand
- OPEI-Outdoor Power Equipment Institute
- IAPMO-International Association of Plumbing and Mechanical Officials
- PCI-Precast/Prestressed Concrete Institute
- PDA-Parenteral Drug Association
- IATA-International Air Transport Association
- PEI-Petroleum Equipment Institute
- PFI-Pipe Fabrication Institute
- PIA-Parachute Industry Association
- ICAO-International Civil Aviation Organization
- PIP-Process Industry Practices
- PPI-Plastics Pipe Institute
- ICC-International Code Council
- PTI-Post-Tensioning Institute
- ICEA-Insulated Cable Engineers Association
- ICML-International Council for Machinery Lubrication
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- IES-Illuminating Engineering Society
- IEST-Institute of Environmental Sciences and Technology
- IFI-Industrial Fasteners Institute
- IICRC-Institute of Inspection, Cleaning and Restoration Certification
- INCITS-InterNational Committee for Information Technology Standards (formerly NCITS)
- INTERN-International Motors, LLC (Formerly NAVISTAR)
- IPC-IPC by Global Electronics Association
- ISA-International Society of Automation
- ISEA-International Safety Equipment Association
- SAE-SAE International
- SAIA-Scaffold & Access Industry Association
- SCTE-Society of Cable Telecommunication Engineers
- SDI-Steel Door Institute
- SES-The Society for Standards Professionals
- SIA-Security Industry Association
- SJI-Steel Joist Institute
- SMACNA-Sheet Metal and Air Conditioning Contractors' National Association
- SME-Society of Manufacturing Engineers
- SMPTE-Society of Motion Picture and Television Engineers
- SN EN-Standards Norway EN
- SPC-Standards Press of China
- SPI-Society of the Plastics Industry
- SSPC-Society for Protective Coatings
- STI/SPFA-Steel Tank Institute/Steel Plate Fabricators Association
- TAPPI-Technical Association of the Pulp and Paper Industry
- TCIA-Tree Care Industry Association
- TEMA-Tubular Exchanger Manufacturers Association
- THHILL-TH Hill Associates, Inc.
- TIA-Telecommunications Industry Association
- TMS-The Masonry Society
- UL-Underwriters Laboratories
- ULC-Underwriters Laboratories of Canada
- UNE-Asociación Española de Normalización
- WILEY-John Wiley and Sons
- WRC-Welding Research Council, Inc.
- WSPC-World Scientific Publishing Co.
- X9-Accredited Standards Committee X9 Incorporated
Your shopping cart is empty!
Product Description
SCOPE AND INTRODUCTION In the general sense, C2 describes a broad array of systems, procedures and operations that connect a pilot with control surfaces or other actuation that cause the aircraft to maneuver per his intended trajectory. The MOPS being developed under current TOR will characterize minimum performance standards for one key element of that broader chain – the airborne data link radio component. Avionics System Certification Background and the Role of RTCA A Technical Standard Order (TSO) from the FAA is a minimum performance standard for specified materials, parts, and appliances used on civil aircraft. When authorized to manufacture a material, part, or appliance to a TSO standard, this is referred to as TSO authorization. Receiving a TSO authorization is both design and production approval. Receiving a TSO Authorization is not an approval to install and use the article in the aircraft. It means that the article meets the specific TSO and the applicant is authorized to manufacture it. RTCA has been formally designated to provide recommendations to the FAA under the Federal Advisory Committee Act. RTCA recommendations are generated by an industry consensus process through the work of Special Committees. Output of these committees comes in a variety of document types. Two of these document types are frequently referred to by the FAA in TSOs and Advisory Circulars (ACs) and, thereby, provide a partial basis for the certification of equipment. These two document types are: • Minimum Aviation System Performance Standards (MASPS) – MASPS specify characteristics that are useful to designers, installers, manufacturers, service providers and users of systems intended for operational use within a defined airspace. Where the systems are global in nature, international applications are taken into consideration. MASPS describe the system (subsystems / functions) and provide information needed to understand the rationale for system characteristics, operational goals, requirements and typical applications. Definitions and assumptions essential to proper understanding of MASPS are provided as well as minimum system test procedures to verify system performance compliance (e.g., end-to-end performance verification). Compliance with RTCA MASPS is recommended as one means of assuring that the system and each subsystem will perform its intended function(s) satisfactorily under conditions normally encountered in routine aeronautical operations for the environments intended. MASPS may be implemented in part or in total. • Minimum Operation Performance Standards (MOPS) – MOPS provide standards for specific equipment(s) useful to designers, manufacturers, installers and users of the equipment. The word "equipment" used in MOPS includes all components and units necessary for the system to properly perform its intended function(s). MOPS provide the information needed to understand the rationale for equipment characteristics and requirements stated, describe typical equipment applications and operational goals, and establish the basis for required performance under the standard. Definitions and assumptions essential to proper understanding are provided as well as installed equipment tests and operational performance characteristics for equipment installations. Compliance with RTCA MOPS is recommended as one means of assuring the equipment will perform its intended function(s) satisfactorily under all conditions normally encountered in routine aeronautical operations. MOPS may be implemented by one or more regulatory documents and/or advisory documents and may be implemented in part or in total. As described above, a MASPS is developed to provide functions, operations, intended use, etc. for a specific aviation system capability. In general, MASPS are independent of specific technology and implementation details. In fact, it is often the case that multiple technology-specific designs are brought forward which each complies with the MASPS, but with differing design instantiations to meet the needs of different applications or operational intents. In contrast, MOPS are focused to provide certification performance standards for specific pieces of equipment using specified technologies and designs. These requirements are organized into three areas: 1) general requirements, 2) equipment performance (standard conditions) and 3) environmental requirements. The level of detail of each of these sections varies with the needs of the specific equipment. In some cases the MOPS can be quite prescriptive, as with the Traffic Collision and Avoidance System (TCAS) where the specific algorithms to be used are specified. Typically when a new capability is being developed, as MASPS is first written to provide that “technology agnostic” set of characteristics that will meet the operational intent of the capability under development. Later, one or more MOPS will be developed to provide specific solutions to sufficient detail to permit manufacturers to fabricate designs and bring them forward under the TSO approval process, providing authorization to manufacture the part. Applicants for aircraft type certification can then include these TSO approved parts as a portion of their certification basis. Use of TSO parts expedites the certification process as a significant body of verification and validation has already been accepted by the FAA for parts manufactured in compliance with the TSO. SC-228 Tasking and Approach The SC-228 TOR calls out a C2 MOPS as the initial required deliverable from this Working Group. Prior work by Special Committee 203 (Unmanned Aircraft Systems) generated three foundational documents which begin the typical requirements chain leading to MOPS: • DO-304 “Guidance Material and Considerations for Unmanned Aircraft Systems”, March, 2007. • DO-320 “Operational Services and Environmental Description for Unmanned Aircraft Systems”, June 2010 • DO-344 “Operational and Functional Requirements and Safety Objectives for Unmanned Aircraft Systems”, June 2013 Typically these documents would be followed by one or more MASPS prior to commencing work on MOPS. SC-203 was sunset by the RTCA Program Management Committee prior to completion of its original TOR, which included UAS MASPS, DAA MASPS and C2 MASPS. Though the specific tasking of SC-228 is to proceed directly to MOPS, it is clear there is a need to generate a body of “MASPS-like” material to fill in some key gaps, in conjunction with the MOPS proper. Lacking a broader set of system level bounding and performance requirements it will be critical for SC-228 to carefully capture assumed requirements and their implications for the broader aviation system integration and certification framework. Typically a TSO based on MOPS is one means, but not the only means, of compliance with a given operational need. Selection of specific performance and/or design choices in these MOPS could potentially have the unintended consequence of limiting or precluding other approaches as this system uses a key shared resource in the electromagnetic spectrum. ASSERTION: Any “MASPS-like” material included in the MOPS should be cleanly segregated from the MOPS proper (i.e., normative material specifying equipment and technology unique design information). Keeping the aviation system level (technology agnostic) information segregated will help clearly delineate the assumed requirements on ANY technology / design brought forward in the future to ensure compatibility with the system specified in this MOPS. Within this white paper, any MASPS-like candidate information will be characterized as such. The MASPS-like material that is included will only be of the scope required to achieve two basic objectives: 1. Support a UAS Control and Non-Payload Communications (CNPC) radio and UAS spectrum assignment and reuse planning, and 2. Ensure compatibility of UAS communications with other existing aeronautical systems. As such, the MASPS-like material provides for compatibility of the waveform components developed in the CNPC MOPS with other technology-specific instantiations that may be characterized in the future. The CNPC MOPS proper will go beyond electromagnetic compatibility and will also provide standards for a specific initial CNPC waveform which addresses the scope of the RTCA SC-228 Terms of Reference (TOR).



