RTCA DO-372-2017 PDF
Addressing Human Factors/Pilot Interface Issues for Avionics
- 3A-3-A Sanitary Standards
- 9000-9000 Store
- A3-Association for Advancing Automation
- A4A-Airlines for America
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ABCB-Australian Building Codes Board
- ABMA-American Bearing Manufacturers Association
- ABMA-BOILER-American Boiler Manufacturers Association
- ACC-American Chemistry Council
- ACGIH-American Conference of Governmental Industrial Hygienists
- ACI-American Concrete Institute
- AEIC-Association of Edison Illuminating Companies
- AES-Audio Engineering Society
- AFCEN-French Association
- AGA-American Gas Association
- AGMA-American Gear Manufacturers Association
- AHAM-Association of Home Appliance Manufacturers
- AHP-American Herbal Pharmacopoeia
- AHRI-Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI)
- AIA-Aerospace Industries Association
- AIAA-American Institute of Aeronautics and Astronautics
- AICHE-American Institute of Chemical Engineers
- AIHA-American Industrial Hygiene Association
- AISC-American Institute of Steel Construction
- ALI-American Ladder Institute
- ALPEMA-Aluminium Plate-Fin Heat Exchanger Manufacturers' Association
- AMCA-Air Movement and Control Association
- ANS-American Nuclear Society
- ANSI-American National Standards Institute
- ANSI/ANSLG-American National Standards Institute / American National Standard Lighting Group
- ANSI/NEMA-American National Standards Institute / National Electrical Manufacturers Association
- ANSI/TCNA-Tile Council of North America, Inc.
- ANSI/UAMA-Unified Abrasives Manufacturers' Association
- API-American Petroleum Institute
- APWA-American Public Works Association
- AREMA-American Railway Engineering and Maintenance-of-Way Association
- ARINC-ARINC Industry Activities
- ARMY-United States Army Publication
- AS-Standards Australia
- ASA-Acoustical Society of America Standards
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASD-STAN prEN-ASD-STAN Standardization
- ASHE-American Society for Healthcare Engineering
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASIS-ASIS International
- ASM-ASM International
- ASME-ASME International
- ASNT-The American Society for Nondestructive Testing
- ASQ-American Society for Quality
- ASSE (Plumbing)-American Society of Sanitary Engineering
- ATIS-The Alliance for Telecommunications Industry Solutions
- ASTM-ASTM International
- AVIXA-Audiovisual and Integrated Experience Association
- AWC-American Wood Council
- AWI-Architectural Woodwork Institute
- AWS-American Welding Society
- AWWA-American Water Works Association
- AWPA-American Wood Protection Association
- B11-B11 Standards, Inc.
- BHMA-Builders Hardware Manufacturers Association
- BICSI-BICSI, A Telecommunications Association
- BioWorld-Thomson Reuters BioWorld
- BMI-Battelle - Metallic Materials Properties Development and Standardization (MMPDS)
- BS-BSI Group
- CAN/CGSB-Canadian General Standards Board
- CAN/ULC-Underwriters Laboratories of Canada
- CEI-Comitato Elettrotecnico Italiano
- CFR-Code of Federal Regulations
- CGA-Compressed Gas Association
- CIE-Commission Internationale de L'Eclairage
- CII-Construction Industry Institute
- CISPR-International Special Committee on Radio Interference
- CLSI-Clinical and Laboratory Standards Institute
- CMAA-Crane Manufacturers Association of America, Inc.
- CRANE-Crane Co.
- CRSI-Concrete Reinforcing Steel Institute
- CSA-Canadian Standards Association
- CTA-Consumer Technology Association (Formerly CEA)
- CTI-Cooling Technology Institute
- DANSK-Dansk Standard
- DID-Data Item Description
- DIN-Deutsches Institut Fur Normung E.V. (German National Standard)
- DNV-DNV
- DOD-Department of Defense
- DOXPUB-Doxpub, Inc.
- DVS-DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E.V.
- ECIA-Electronic Components Industry Association
- EEC-European Union Directives
- EEMUA-Engineering Equipment and Materials Users Association
- ESD-EOS/ESD Association, Inc.
- ETSI-European Telecommunications Standards Institute
- FCI-Fluid Controls Institute
- ISO-International Organization for Standardization
- ISO/IEC/IEEE-International Organization for Standardization / International Electrotechnical Commission / Institute of Electrical and Electronics Engineers
- ISPE-International Society for Pharmaceutical Engineering
- FED-Federal Specifications and Standards
- ISTA-International Safe Transit Association
- ISUZU-Isuzu Motors Ltd.
- FM Approvals-FM Approvals
- JEDEC-JEDEC Solid State Technology Association
- JSA-Japanese Standards Association (JIS Standards)
- LIA-Laser Institute of America
- FORD-Ford Motor Company
- MBMA-Metal Building Manufacturers Association
- MCGRAW-HILL-McGraw-Hill Publishing Company
- FRPI-Fiberglass Reinforced Plastics Institute, Inc.
- MIL-Military Specifications and Standards
- MPIF-Metal Powder Industries Federation
- MPMA-Motion + Power Manufacturers Alliance (MPMA) (Formerly AGMA & ABMA)
- GMW-General Motors Worldwide
- MSS-Manufacturers Standardization Society of the Valve and Fittings Industry
- NAAMM-National Association of Architectural Metal Manufacturers
- GPA-GPA Midstream Association
- NACE-National Association of Corrosion Engineers
- NADCA-National Air Duct Cleaners Association
- NAS-Aerospace Industries Association - National Aerospace Standard
- HEI-Heat Exchange Institute
- NASA-National Aeronautics and Space Administration
- NBBI-The National Board of Boiler and Pressure Vessel Inspectors
- NCSL-National Conference of Standards Laboratories International
- HFES-Human Factors and Ergonomics Society
- NECA-National Electrical Contractors Association
- RTCA-RTCA, Inc.
- HI-Hydraulic Institute
- NEMA-National Electrical Manufacturers Association
- NETA-InterNational Electrical Testing Association
- NFPA (Fire)-National Fire Protection Association
- HIR-H.I.R. Technical Services
- NFPA (Fluid)-National Fluid Power Association
- NFSI-National Floor Safety Institute
- HPS-Health Physics Society
- NGA-National Glass Association
- NISO-National Information Standards Organization
- NORSOK-NORSOK
- I3A-International Imaging Industry Association
- NRC-National Research Council Canada
- NSC-Natural Stone Council
- IADC-International Association of Drilling Contractors
- NSF-NSF International
- NZS-Standards New Zealand
- OPEI-Outdoor Power Equipment Institute
- IAPMO-International Association of Plumbing and Mechanical Officials
- PCI-Precast/Prestressed Concrete Institute
- PDA-Parenteral Drug Association
- IATA-International Air Transport Association
- PEI-Petroleum Equipment Institute
- PFI-Pipe Fabrication Institute
- PIA-Parachute Industry Association
- ICAO-International Civil Aviation Organization
- PIP-Process Industry Practices
- PPI-Plastics Pipe Institute
- ICC-International Code Council
- PTI-Post-Tensioning Institute
- ICEA-Insulated Cable Engineers Association
- ICML-International Council for Machinery Lubrication
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- IES-Illuminating Engineering Society
- IEST-Institute of Environmental Sciences and Technology
- IFI-Industrial Fasteners Institute
- IICRC-Institute of Inspection, Cleaning and Restoration Certification
- INCITS-InterNational Committee for Information Technology Standards (formerly NCITS)
- INTERN-International Motors, LLC (Formerly NAVISTAR)
- IPC-IPC by Global Electronics Association
- ISA-International Society of Automation
- ISEA-International Safety Equipment Association
- SAE-SAE International
- SAIA-Scaffold & Access Industry Association
- SCTE-Society of Cable Telecommunication Engineers
- SDI-Steel Door Institute
- SES-The Society for Standards Professionals
- SIA-Security Industry Association
- SJI-Steel Joist Institute
- SMACNA-Sheet Metal and Air Conditioning Contractors' National Association
- SME-Society of Manufacturing Engineers
- SMPTE-Society of Motion Picture and Television Engineers
- SN EN-Standards Norway EN
- SPC-Standards Press of China
- SPI-Society of the Plastics Industry
- SSPC-Society for Protective Coatings
- STI/SPFA-Steel Tank Institute/Steel Plate Fabricators Association
- TAPPI-Technical Association of the Pulp and Paper Industry
- TCIA-Tree Care Industry Association
- TEMA-Tubular Exchanger Manufacturers Association
- THHILL-TH Hill Associates, Inc.
- TIA-Telecommunications Industry Association
- TMS-The Masonry Society
- UL-Underwriters Laboratories
- ULC-Underwriters Laboratories of Canada
- UNE-Asociación Española de Normalización
- WILEY-John Wiley and Sons
- WRC-Welding Research Council, Inc.
- WSPC-World Scientific Publishing Co.
- X9-Accredited Standards Committee X9 Incorporated
Your shopping cart is empty!
Product Description
PURPOSE AND SCOPE Introduction The objective of this document is to increase human factors 1 awareness by the individuals who are responsible for the design and certification of systems and equipment and related interfaces designed for use by the flightcrew. This applies to systems and equipment that are certified at the box level or installation level. The term “flightcrew” is used in this document to represent a pilot, flight engineer, or flight navigator assigned to duty in an aircraft during flight time per Title 14 Code of Federal Regulations (CFR) Part 1 Section 1.1. This document aims to facilitate the identification of flightcrew interface aspects, considerations, and risks to design and aid the resolution of the human factors issues associated with the avionics. The importance of addressing the human factors aspects of the design is highlighted in the Operational Use of Flight Path Management Systems - Final Report of the Performance-based Operations Aviation Rulemaking Committee/Commercial Aviation Safety Team, Flight Deck Automation Working Group that identifies incidents and aviation accidents that have occurred due to pilot-machine interface breakdowns, such as manual flight path control errors, controlled flight into terrain, mode confusion, and over reliance on automation. The report highlights the impact of highly integrated flight decks 2 and poorly integrated retrofit solutions and how each can increase the flightcrew knowledge requirements and add complexity, which may result in pilot confusion and errors during flight operations in all phases of flight. The Federal Aviation Administration (FAA) previously documented information on human factors in the expired FAA Notice 8110.98, Addressing Human Factors/Pilot Interface Issues of Complex, Integrated Avionics as Part of the Technical Standard Order (TSO) Process . This RTCA document extends the expired Notice beyond avionics submitted for new or amended Technical Standard Order (TSO) Authorization to include installed electronic systems (and associated controls, displays, labels, and placards) used by the flightcrew 3 that are submitted for a Type Certificate (TC), Supplemental Type Certificate (STC), or Amended Type Certificate (ATC) under 14 CFR and Certification Specification (CS) Parts 23, 25, 27, and 29. The FAA intends to implement this document in an information-only advisory circular (AC). Regulatory and guidance material takes precedence over this document. This document outlines a process for identifying the flightcrew interface aspects of a system as part of the engineering design and certification process, and provides previously approved design examples of how human factors aspects were addressed. Neither the process nor the examples are meant to be prescriptive. Therefore, “must” statements are not contained herein unless they refer to certification authority regulations. Good practices and lessons learned are provided as a means to inform the development and certification process in an effort to avoid common pitfalls that have been observed in past certification efforts. It is assumed that the reader has an understanding of human factors or access to human factors specialists and therefore this is not a ‘how to’ human factors document. The intended readers include Original Equipment Manufacturers (OEMs), including the Designated Engineering Representatives (DERs), Authorized Representatives (ARs), Unit Members (UMs) or Organization Designation Authorization (ODA) holders who represent both industry and the certification authority, flight test pilots, flight test engineers, as well as human factors specialists and other personnel at the Aircraft Certification Offices (ACO) and Flight Test Branch of the appropriate certification authority. This document is meant to aid in the early identification of human factors aspects and the resolution of flightcrew interface issues as part of the engineering design and certification process, but is not intended as an MOC for certification. This RTCA document contains the following sections: Section 1 covers the introduction and overview of the document (current section). Section 2 presents recommended steps for evaluating the human factors/pilot interface aspects of flightcrew systems during the engineering design and certification process to facilitate future approvals and streamline or establish commonality in the certification process. The process is not intended as a means of compliance (MOC) but rather as guidance for identifying and resolving flightcrew interface issues. Section 2 describes an iterative approach in which human factors aspects are identified, addressed and issues resolved continuously throughout the development program and not something left for the formal test phase at the end of a certification program. The recommended process has been successfully applied in previous aircraft programs and can be used as a guide for both the applicant and the certification authority as they go through a certification program. The process described in Section 2 is intentionally generic so as to fit into the overall certification effort, with the understanding that the scope of the activities should be tailored to the size of the project. Adherence to the process is a recommendation only. To assist in the evaluation of human factors aspects, good practices from past certification programs are provided as examples for carrying out each process step. Section 3 provides examples of prevalent, recurring human factors/pilot interface issues that have been identified during previous certification programs. The identified issues are not a comprehensive list of all possible flightcrew interface issues but are meant to serve as an aid in the early identification of certification topics of discussion. Approved design examples emphasize the design aspects that resolved a particular human factors issue but are not the only method available to address the issue. Implementing the design examples in this document does not guarantee certification approval but instead represent good design practices that have led to an effective means for resolving the issue. Also included are a number of lessons learned that include design and evaluation considerations from a human factors perspective. When existing regulations and guidance are applicable, it is noted. The human factors topics compiled from previous programs that generated the most frequently recurring certification issues include: • Display Hardware Characteristics (Display Viewing Envelope, Display Luminance, Reflectivity, and Brightness Control including Retrofit Considerations, Latency) • Information Presentation (Color including Retrofit Considerations, Symbology, Display Labeling, Clutter, Timeliness of Information) • Alerting, Annunciations, and System Status Indications (Degradation of Sensor Sources, Crew Alerting Systems, Inhibits and Control of Nuisance Alerting, Retrofit Considerations: Integration Using Equipment from Multiple Suppliers) • Controls (Feedback, Control Labeling, Functionality, Cursor Control Devices, Touch Screens) • Flight Deck Arrangement (Visibility and Readability, Reach Accessibility) • Automatic Flight Control and Flight Guidance Systems (Awareness of System Modes and States, Low Speed Alerting and Mode Transitions, Autopilot Engagement/Disengagement, Manual Control During Autopilot Use, Vertical Navigation, Retrofit Considerations: Flight Directors and Flight Path Markers, Retrofit Considerations: Automatic Flight Control System (AFCS) and Autopilot (AP) Integration with Servos) Section 4 provides the list of committee members. The document also contains four appendices. Appendix A contains human factors related regulatory references and guidance applicable to Title 14 CFR for Parts 23, 25, 27 and 29 aircraft, and European Aviation Safety Agency (EASA) CS for Part 25. Also, industry standards and other human factors related documents referenced in this document are listed in this appendix. Appendix B provides websites for human factors related regulatory and guidance material and industry documents. Appendix C contains the glossary of terms used in this document. Appendix D is a list of acronyms and abbreviations. Note that throughout the document regulations and guidance material are referenced. When the guidance is applicable to all Title 14 of the Code of Federal Regulations, Parts 23, 25, 27, and 29 aircraft, the abbreviation 2X is used, such as 2X.1301 Function and installation. In this document, technical and guidance references with “()” indicate that the most recent version of the reference should be used. See Appendix A for the versions available at the time of publication of this document. 1 The FAA Reauthorization Act of 2016 defines human factors as “a multidisciplinary field that generates and compiles information about human capabilities and limitations and applies it to design, development, and evaluation of equipment, systems, facilities, procedures, jobs, environments, staffing, organizations, and personnel management for safe, efficient, and effective human performance, including people’s use of technology”. When applied specifically to the field of aviation, the aim is to use human factors knowledge to improve safety, efficiency, performance, and reliability through the focus on how pilot performance is impacted by systems, procedures, and training. 2 The term “flight deck” is used interchangeably with “cockpit” throughout the document. There is no difference in meaning between the two terms as used in this document. 3 For the purposes of this document, the term “avionics” includes installed electronic systems and all associated controls, displays, labels, and placards used by the flightcrew.



