ULC CAN/ULC 112.1-2025 PDF

ULC CAN/ULC 112.1-2025 PDF

Standard for Leakage Rated Dampers for Use in Smoke Control Systems

$101.50 $203.00 -50%
Product Code: ULC CAN/ULC 112.1
Stock In Stock
Edition: 3.
Published: 12/22/2025
Number of Pages: 30
File Size: 1 file, 460 KB

Available Options

Product Description

Standard for Leakage Rated Dampers for Use in Smoke Control Systems

Scope: 1.1 These requirements cover dampers intended for use in heating, ventilating and air conditioning (HVAC) systems. 1.2 Leakage-rated dampers (smoke dampers) are intended to restrict the spread of smoke in HVAC systems that are designed to control the movement of smoke within a building when the HVAC system is operational in engineered smoke control systems. 1.3 Combination Fire and Smoke Dampers are intended to restrict the spread of smoke in HVAC systems that are designed to control the movement of smoke within a building when the HVAC system is operational in engineered smoke control systems, and provide a barrier to passage of flame and hot gases. Combination Fire and Smoke Dampers shall meet the requirements of ULC-S112-10, Standard Method of Fire Test of Fire Damper Assemblies and this Standard (see Table 1.1). Table 1.1 Various Damper Tests Test Section Leakage-rated dampers Combination fire and smoke leakage dampers Fire-Endurance and Hose-Stream Cycling Salt-Spray Exposure Spring Closing Force Dynamic Closure Duct Impact Hydrostatic (Actuators) Temperature Degradation Leakage Operation Mutiple Assembly Accelerated Aging (Gaskets) Rigidity Referenced Publications 2.1 Any undated reference to a code or standard appearing in the requirements of this Standard shall be interpreted as referring to the latest edition of that code or standard. 2.2 The following publications are referenced in this Standard: AMCA Standard 500-D-98, Laboratory Methods for Testing Dampers for Rating ASTM A313/A313M-02 (R2003), Standard Specification for Stainless Steel Spring Wire ASTM A653/A653M-06 REVA, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc- Iron Alloy Coated (Galvannealed) by the Hot-Dip Process

Contents:

  • INTRODUCTION
  • Scope
  • 18.1 General
  • 18.2 Heated air leakage measurement for correlation
  • 18.3 Samples required for correlation
  • 18.4 Ambient leakage measurement for correlation
  • 19.1 General
  • 19.2 Method
  • 22.1 General
  • 22.2 Lateral displacement test
  • 22.3 Longitudinal displacement test
  • 23.1 Classification

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ULC CAN/ULC 112.1-2025 PDF

ULC CAN/ULC 112.1-2025 PDF

$101.50 $203.00